Use only the official links below. No real recovery asks for your seed phrase or private key. If anyone offers to recover funds for you, it is a scam.

1. Archived L2 bridge funds

   Archived L2s

   $21 · 3 positionsMay not work

   This chain shut down and its state is gone, so no one can prove a withdrawal now. The Ethereum bridge still holds the money; only the chain team can release it.

   1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
   2. Check that chain's official site for a refund or recovery notice.
   3. Without the chain's final state nobody can prove a withdrawal. Only the chain team can release the bridge funds.

   Official bridges for the chains your positions are on:

   • Redstone balance claim (opens in a new tab)

2. Polygon zkEVM balance

   $13 · 2 positions

   Polygon zkEVM's sequencer stopped on 1 July 2026. Wallet-held funds not bridged before then can be claimed on Ethereum in a claim UI. Polygon treats unclaimed assets as abandoned after 2027-12-31.

   1. Open the Polygon zkEVM claims site and connect the wallet that held the funds.
   2. Pick your balances and send the claim transaction on Ethereum.
   3. Funds locked inside DeFi contracts are not auto-migrated. Ask Polygon through the forum post.

   Official bridges for the chains your positions are on:

   • Agglayer bridge UI (opens in a new tab)

   zkEVM claims site (opens in a new tab)Official docs (opens in a new tab)

3. Orbit Lending deposit on Blast

   $7 · 3 positionsMay not work

   You supplied funds to Orbit Lending on Blast, which was exploited. You can still withdraw, but some markets hold less cash than is owed, so first come, first served.

   1. Open your cToken contract (listed in the row) on Blast's block explorer, Write tab, connect wallet.
   2. Call redeem(cTokenBalance) or redeemUnderlying(amount).
   3. If you have a borrow in the same market, repay it first; your collateral is locked until then.

   Compound v2 docs (same contract code) (opens in a new tab)

4. Funds on shut-down Swellchain

   Swellchain, Swell

   $5 · 1 position

   Swell closed Swellchain: the final withdrawal deadline was 2026-06-15 and the chain was to run until 2026-06-30. Withdrawals started before 15 June can still be finalized on Ethereum.

   1. If your withdrawal was started before 15 June: after the 7-day proof wait, prove it on the Ethereum OptimismPortal2 0x758E0EE66102816F5C3Ec9ECc1188860fbb87812 (proveWithdrawalTransaction).
   2. Then call finalizeWithdrawalTransaction on the same contract. You pay ETH gas.
   3. If you never started one: Swell said contract withdrawals were possible until 30 June but are technical. Ask Swell support.

   Official bridges for the chains your positions are on:

   • Swell Superbridge UI (listed by Swellchain docs) (opens in a new tab)

   Official docs (opens in a new tab)

5. Thruster v3 position on Blast

   $5 · 1 position

   You hold a Thruster v3 liquidity position (an NFT) on Blast. Thruster has shut down, but the position contract still works.

   1. Open the position contract 0x434575EaEa081b735C985FA9bf63CD7b87e227F9 on Blastscan, Write tab, and connect the wallet that owns the NFT.
   2. Call decreaseLiquidity with your tokenId, the liquidity amount, amount0Min, amount1Min and a deadline. Thruster's old guide explains each field.
   3. Then call collect(tokenId, recipient, max, max) to receive the tokens. You can call burn(tokenId) afterwards to delete the empty NFT.
   4. If the NFT is not in your wallet, it may be locked in another contract such as Hyperlock. Withdraw it from there first.

   Thruster position manager (opens in a new tab)

6. Funds in frozen StarkEx apps

   Sorare, Immutable X, ApeX Pro, edgeX v1, Myria

   $5 · 1 position

   Some StarkEx apps keep balances off-chain. A pending withdrawal can be claimed now. A deposit-only record cannot: the app operator must first publish data.

   1. Check the row type. A pending withdrawal can be claimed now; a deposit ledger row cannot.
   2. For a pending withdrawal, call withdraw with your owner key and asset type on the app's StarkEx contract (Etherscan). Funds go to your registered address.
   3. For a frozen app, the escape hatch needs the operator or data committee to publish state first. See the StarkWare docs.

   Official docs (opens in a new tab)

7. Expired Pendle position

   $5 · 2 positions

   You hold Pendle PT or LP tokens from a market that has expired. They can be redeemed for the underlying asset at any time.

   1. Open the Pendle app, connect your wallet, and go to Portfolio.
   2. Find the expired position and press Redeem (for PT) or Remove liquidity (for LP).
   3. For LP, redeem the PT you receive afterwards. Confirm and pay gas.

   Pendle app (opens in a new tab)Official docs (opens in a new tab)

8. Seamless v1 deposit on Base

   $2 · 1 position

   You supplied funds to the Seamless v1 lending pool on Base (an Aave v3 fork). seamlessprotocol.com now redirects to X, but the pool contract still lets you withdraw.

   1. Open the pool contract 0x8F44Fd754285aa6A2b8B9B97739B79746e0475a7 on Basescan, Write tab, connect wallet.
   2. Call withdraw(asset, amount, to) with the token address, amount = max (type(uint256).max) and your wallet.
   3. If you have debt, repay() first or withdraw only the free part.

   Seamless v1 pool on Basescan (opens in a new tab)Official docs (opens in a new tab)

9. Saddle pool liquidity

   Saddle Finance

   $2 · 1 position

   Saddle Finance is closed, but its pools still hold your share. Some pools cannot be exited because a Synthetix token in them is suspended; only Synthetix or Saddle can fix those.

   1. If your LP tokens are in a Saddle gauge, withdraw them from the gauge first.
   2. Approve the LP token to the pool, then on the pool contract's Write tab call removeLiquidity(amount, minAmounts, deadline).
   3. If your row says blocked, the exit will fail until Synthetix or Saddle acts.

   Official docs (opens in a new tab)

10. GMX v1 GLP staked

    $2 · 1 position

    You hold staked GLP, the liquidity token of GMX v1 (Arbitrum or Avalanche). GMX stopped v1 trading in July 2025; you can only sell existing GLP back for the underlying assets.

    1. Open v1.app.gmx.io, connect your wallet and use the Sell GLP page. If your GLP is staked, the page unstakes it as part of the sale.
    2. If the page fails, call unstakeAndRedeemGlp(tokenOut, glpAmount, minOut, receiver) on RewardRouterV2: Arbitrum 0xB95DB5B167D75e6d04227CfFFA61069348d271F5.
    3. GMX docs also mention claims for GLP holders in their distributions section. Rows marked as contracts (vesters, vaults) are unclear.

    GMX v1 app (opens in a new tab)Official docs (opens in a new tab)

11. Alpaca staked ibTokens (FairLaunch)

    Alpaca Finance

    $2 · 1 position

    You staked Alpaca ibTokens in the old FairLaunch farm on BNB Chain. The app is gone but the contract lets you take them out. The ibUSDC pool (pid 24) may not pay.

    1. Open FairLaunch 0xA625AB01B08ce023B2a342Dbb12a16f2C8489A8F on BscScan, Write Contract.
    2. Call withdrawAll(user, pid) with your address and the pool id, or emergencyWithdraw(pid).
    3. Then call withdraw(shares) on the ibToken vault to get the base token. Contract wallets must send from the contract.

    FairLaunch on BscScan (opens in a new tab)

12. Nucleus vault shares

    Nucleus (BoringVault)

    $1 · 1 position

    Nucleus deprecated its vaults on 19 Dec 2025 and the withdraw page is gone. You can redeem vault shares through the Teller contract, but only for assets the vault still holds.

    1. Read the Nucleus deprecation guide first.
    2. Check which tokens the vault still holds, and your vault token balance, on Etherscan (or the Plume explorer).
    3. On the vault's Teller contract, Write tab, call bulkWithdraw(withdrawAsset, shareAmount, minimumAssets, to). The guide says to use 0 for minimumAssets.

    Nucleus deprecation guide (opens in a new tab)Official docs (opens in a new tab)

13. Lisk L2 balance (closing)

    $1 · 1 position

    Lisk's own chain closes on 2026-10-31. Lisk says withdrawing to Ethereum takes about 8 days, and unstaking LSK adds 3 days. Start now.

    1. Open the Lisk bridge (type bridge.lisk.com yourself) and connect your wallet.
    2. Withdraw your assets to Ethereum. If you staked LSK, unlock it first and wait 3 days.
    3. After the wait, prove and finalize the withdrawal on Ethereum. You pay gas on both chains.

    Official bridges for the chains your positions are on:

    • Lisk Bridge (opens in a new tab)

    Lisk bridge (opens in a new tab)Official docs (opens in a new tab)

14. zkSync Lite balance not claimed

    <$1 · 1 position

    zkSync Lite was shut down on 2026-05-04. Remaining balances are claimable on Ethereum through a claim contract and a withdrawal portal. Your account is on that list and has not claimed.

    1. Open the zkSync Lite withdrawal portal and connect the wallet that owned the account.
    2. The portal finds your address in the final state, builds the proof and sends the claim. Follow its prompts.
    3. Confirm the Ethereum transaction. Tokens go to your L1 address. Matter Labs sponsors gas for the first 100,000 withdrawals.

    zkSync Lite withdrawal portal (opens in a new tab)Official docs (opens in a new tab)

15. Balancer v2 pool share

    <$1 · 1 position

    You hold Balancer v2 pool tokens, in your wallet or staked. You can exit the pool. Balancer has proposed a wind-down: if it passes, pools become withdraw-only on 30 Oct 2026.

    1. Open the Balancer app, find your pool and use Remove liquidity. Do this before 30 Oct 2026.
    2. If the app does not work, call exitPool on the Balancer v2 Vault 0xBA12222222228d8Ba445958a75a0704d566BF2C8 (Etherscan, Write tab).
    3. If your tokens are staked in Aura, Beefy or a gauge, unstake there first.

    Balancer app (opens in a new tab)Official docs (opens in a new tab)

16. MATIC never swapped to POL

    Polygon

    <$1 · 1 position

    You hold old MATIC on Ethereum that was never swapped to POL. The swap is 1 to 1. Polygon has not announced a deadline.

    1. Open the Polygon Portal upgrade page and connect your wallet. Switch the wallet to Ethereum.
    2. Approve the upgrade contract to use your MATIC.
    3. Confirm the migrate transaction to receive POL. You pay Ethereum gas.

    Polygon portal (opens in a new tab)Official docs (opens in a new tab)

17. Expired veBAL lock

    Balancer

    <$1 · 1 position

    Your veBAL lock ended but you never withdrew. You get 80BAL-20WETH pool tokens back, not BAL.

    1. Open the veBAL contract on Etherscan and go to Write Contract.
    2. Connect the owner wallet and call withdraw().
    3. Then exit the Balancer 80/20 pool to get BAL and WETH.

    veBAL contract (opens in a new tab)Official docs (opens in a new tab)

18. Alpaca v1 vault tokens

    Alpaca Finance

    <$1 · 1 position

    You hold Alpaca v1 ibTokens (deposit receipts) on BNB Chain. The vault still pays out the underlying token.

    1. Open the ibToken contract (contract column) on BscScan and go to Write Contract.
    2. Connect the owner wallet and call withdraw(shares).
    3. ibBUSD, ibETH, ibBTCB and ibUSDC were migrated: withdraw may pay a different token. If it reverts, read the contract's functions on BscScan.

19. Ended Sablier stream (no price)

    $0 · 1 position

    An ended or canceled Sablier stream whose token has no known price. Most are airdrop vesting or spam tokens, so the value is unknown and may be zero.

    1. Open the Sablier app and connect the wallet that owns the stream.
    2. Press Withdraw on the ended stream if you want the tokens.
    3. Be careful with unknown tokens: many are spam.

    Sablier app (opens in a new tab)Official docs (opens in a new tab)