Use only the official links below. No real recovery asks for your seed phrase or private key. If anyone offers to recover funds for you, it is a scam.

1. Saddle pool liquidity

   Saddle Finance

   $93 · 1 position

   Saddle Finance is closed, but its pools still hold your share. Some pools cannot be exited because a Synthetix token in them is suspended; only Synthetix or Saddle can fix those.

   1. If your LP tokens are in a Saddle gauge, withdraw them from the gauge first.
   2. Approve the LP token to the pool, then on the pool contract's Write tab call removeLiquidity(amount, minAmounts, deadline).
   3. If your row says blocked, the exit will fail until Synthetix or Saddle acts.

   Official docs (opens in a new tab)

2. Unclaimed OP Stack chain withdrawal

   Blast, Mantle, Mode, Zora, Lisk, Ink, Unichain and other OP chains

   $70 · 1 position

   You withdrew from an OP Stack chain to Ethereum but never completed the last step. The funds wait in that chain's bridge.

   1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
   2. Connect the receiving wallet and open your transactions. Press Prove, wait out the challenge period shown on the page, then press Finalize.
   3. Pay the Ethereum gas fee each time.

   Official bridges for the chains your positions are on:

   • Blast bridge (opens in a new tab)

   Official docs (opens in a new tab)

3. Expired Pendle position

   $61 · 2 positions

   You hold Pendle PT or LP tokens from a market that has expired. They can be redeemed for the underlying asset at any time.

   1. Open the Pendle app, connect your wallet, and go to Portfolio.
   2. Find the expired position and press Redeem (for PT) or Remove liquidity (for LP).
   3. For LP, redeem the PT you receive afterwards. Confirm and pay gas.

   Pendle app (opens in a new tab)Official docs (opens in a new tab)

4. Karak withdrawal not finished

   $59 · 1 position

   You started a withdrawal from Karak and the delay is over, but you never finished it. Your tokens wait in the Karak contract for the withdrawer address.

   1. Open the Karak app and connect the withdrawer wallet.
   2. Find your pending withdrawal and finish or claim it.
   3. If the app does not show it, use the DelegationSupervisor 0xafa904152e04abff56701223118be2832a4449e0 on Etherscan (Write as Proxy tab) and call finishWithdraw with your withdrawal details from the startWithdraw event.

   Karak app (opens in a new tab)

5. EigenLayer withdrawal not completed

   $47 · 1 position

   You queued a withdrawal from EigenLayer and the waiting time has passed, but you never completed it. Only the withdrawer address can complete it.

   1. Open the EigenLayer app and connect the withdrawer wallet.
   2. Find your queued withdrawal and press Complete.
   3. Choose to receive the tokens (not re-deposit). Confirm and pay gas in ETH.

   EigenLayer app (opens in a new tab)

6. Polygon zkEVM balance

   $34 · 3 positions

   Polygon zkEVM's sequencer stopped on 1 July 2026. Wallet-held funds not bridged before then can be claimed on Ethereum in a claim UI. Polygon treats unclaimed assets as abandoned after 2027-12-31.

   1. Open the Polygon zkEVM claims site and connect the wallet that held the funds.
   2. Pick your balances and send the claim transaction on Ethereum.
   3. Funds locked inside DeFi contracts are not auto-migrated. Ask Polygon through the forum post.

   Official bridges for the chains your positions are on:

   • Agglayer bridge UI (opens in a new tab)

   zkEVM claims site (opens in a new tab)Official docs (opens in a new tab)

7. Funds in frozen StarkEx apps

   Sorare, Immutable X, ApeX Pro, edgeX v1, Myria

   $12 · 2 positionsYou can claim$8May not work$4

   Some StarkEx apps keep balances off-chain. A pending withdrawal can be claimed now. A deposit-only record cannot: the app operator must first publish data.

   1. Check the row type. A pending withdrawal can be claimed now; a deposit ledger row cannot.
   2. For a pending withdrawal, call withdraw with your owner key and asset type on the app's StarkEx contract (Etherscan). Funds go to your registered address.
   3. For a frozen app, the escape hatch needs the operator or data committee to publish state first. See the StarkWare docs.

   Official docs (opens in a new tab)

8. Expired Element Finance position

   $11 · 3 positions

   You hold Element v1 principal tokens (PT), yield tokens (YT) or pool shares. All tranches have ended, so they can be redeemed.

   1. Open the tranche contract (tranche_or_pool column) on Etherscan, Write Contract tab.
   2. PT: call withdrawPrincipal(amount, to). YT: call withdrawInterest(amount, to). Both only work after the tranche expiry.
   3. LP shares: exit the Balancer pool with exitPool first, then redeem as above.

   Official docs (opens in a new tab)

9. Balancer v2 pool share

   $8 · 1 position

   You hold Balancer v2 pool tokens, in your wallet or staked. You can exit the pool. Balancer has proposed a wind-down: if it passes, pools become withdraw-only on 30 Oct 2026.

   1. Open the Balancer app, find your pool and use Remove liquidity. Do this before 30 Oct 2026.
   2. If the app does not work, call exitPool on the Balancer v2 Vault 0xBA12222222228d8Ba445958a75a0704d566BF2C8 (Etherscan, Write tab).
   3. If your tokens are staked in Aura, Beefy or a gauge, unstake there first.

   Balancer app (opens in a new tab)Official docs (opens in a new tab)

10. Funds in old Ethereum contracts (2015-2021)

    $5 · 3 positions

    You have a balance in an old Ethereum contract (The DAO, EtherDelta, IDEX, the 2017 ENS registrar, DigixDAO and others). Each contract has its own withdraw call. Use the wallet that owns the position.

    1. The DAO: on the DAO token 0xbb9bc244d798123fde783fcc1c72d3bb8c189413 call approve(0xbf4ed7b27f1d666546e30d74d50d173d20bca754, yourBalance). Then call withdraw() on the WithdrawDAO contract 0xbf4ed7b27f1d666546e30d74d50d173d20bca754. It pays 1 ETH per 100 DAO.
    2. EtherDelta 0x8d12a197cb00d4747a1fe03395095ce2a5cc6819: from the wallet that deposited, call withdraw(amount) for ETH or withdrawToken(token, amount) for a token. Amounts are in the token's smallest unit.
    3. IDEX v1 0x2a0c0dbecc7e4d658f48e01e3fa353f44050c208: call withdraw(token, amount). Use token 0x0000000000000000000000000000000000000000 for ETH. It reverts if your last IDEX activity was fewer than 240 blocks ago.
    4. 2017 ENS registrar 0x6090a6e47849629b7245dfa1ca21d94cd15878ef: call releaseDeed(labelhash) for the name. The labelhash is keccak256 of the name without .eth. The deposit goes back to the deed owner.
    5. Other contracts (DigixDAO, Neufund and more): use the contract's own withdraw or refund function on Etherscan from the owner wallet. Check the contract's code first.

    WithdrawDAO contract (The DAO) (opens in a new tab)Official docs (opens in a new tab)

11. zkSync Lite balance not claimed

    $2 · 3 positions

    zkSync Lite was shut down on 2026-05-04. Remaining balances are claimable on Ethereum through a claim contract and a withdrawal portal. Your account is on that list and has not claimed.

    1. Open the zkSync Lite withdrawal portal and connect the wallet that owned the account.
    2. The portal finds your address in the final state, builds the proof and sends the claim. Follow its prompts.
    3. Confirm the Ethereum transaction. Tokens go to your L1 address. Matter Labs sponsors gas for the first 100,000 withdrawals.

    zkSync Lite withdrawal portal (opens in a new tab)Official docs (opens in a new tab)

12. Curve fees not claimed (3CRV)

    $2 · 1 position

    You locked CRV in veCRV and earned fee rewards in 3CRV from the old Curve fee distributor, but never claimed them. They are still in the contract.

    1. Open the contract's Write tab on the block explorer and connect your wallet.
    2. Call claim with your address. Anyone can call it; the tokens go to you.
    3. If many weeks are unclaimed, repeat the call; each call covers up to 20 weeks.
    4. Check your wallet for the 3CRV.

    Fee distributor on Etherscan (opens in a new tab)

13. dYdX v3 balance

    <$1 · 1 position

    dYdX v3 was shut down and its exchange was set to 'frozen' on Ethereum. Your USDC can still be taken out through the escape hatch, or withdrawn if already released.

    1. Open dYdX's v3 sunset post and use the Escape Hatch link in its last update. It is hosted by an independent third party.
    2. Escape needs a proof for your stark key and position. The page builds it; the escape call goes to StarkPerpetual 0xD54f502e184B6B739d7D27a6410a67dc462D69c8.
    3. Then call withdraw from your registered Ethereum address to receive the USDC. You pay Ethereum gas.

    dYdX StarkPerpetual contract (opens in a new tab)Official docs (opens in a new tab)

14. PoolTogether deposit still in pool

    <$1 · 1 position

    You deposited into a PoolTogether v3 or v4 prize pool and never withdrew. Your deposit is still in the pool contract.

    1. Open the prize pool contract (prize_pool address) on the block explorer.
    2. v4: call withdrawFrom(from, amount) with your address. v3: call withdrawInstantlyFrom(from, amount, controlledToken, maximumExitFee).
    3. v3 can charge an early-exit fee. Confirm and check your wallet.

    Official docs (opens in a new tab)