Use only the official links below. No real recovery asks for your seed phrase or private key. If anyone offers to recover funds for you, it is a scam.

1. Unclaimed OP Stack chain withdrawal

   Blast, Mantle, Mode, Zora, Lisk, Ink, Unichain and other OP chains

   $62 · 2 positions

   You withdrew from an OP Stack chain to Ethereum but never completed the last step. The funds wait in that chain's bridge.

   1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
   2. Connect the receiving wallet and open your transactions. Press Prove, wait out the challenge period shown on the page, then press Finalize.
   3. Pay the Ethereum gas fee each time.

   Official bridges for the chains your positions are on:

   • Mantle Bridge (opens in a new tab)

   Official docs (opens in a new tab)

2. zkSync Lite balance not claimed

   $34 · 2 positions

   zkSync Lite was shut down on 2026-05-04. Remaining balances are claimable on Ethereum through a claim contract and a withdrawal portal. Your account is on that list and has not claimed.

   1. Open the zkSync Lite withdrawal portal and connect the wallet that owned the account.
   2. The portal finds your address in the final state, builds the proof and sends the claim. Follow its prompts.
   3. Confirm the Ethereum transaction. Tokens go to your L1 address. Matter Labs sponsors gas for the first 100,000 withdrawals.

   zkSync Lite withdrawal portal (opens in a new tab)Official docs (opens in a new tab)

3. Nucleus vault shares

   Nucleus (BoringVault)

   $29 · 1 positionMay not work

   Nucleus deprecated its vaults on 19 Dec 2025 and the withdraw page is gone. You can redeem vault shares through the Teller contract, but only for assets the vault still holds.

   1. Read the Nucleus deprecation guide first.
   2. Check which tokens the vault still holds, and your vault token balance, on Etherscan (or the Plume explorer).
   3. On the vault's Teller contract, Write tab, call bulkWithdraw(withdrawAsset, shareAmount, minimumAssets, to). The guide says to use 0 for minimumAssets.

   Nucleus deprecation guide (opens in a new tab)Official docs (opens in a new tab)

4. Expired Pendle position

   $27 · 1 position

   You hold Pendle PT or LP tokens from a market that has expired. They can be redeemed for the underlying asset at any time.

   1. Open the Pendle app, connect your wallet, and go to Portfolio.
   2. Find the expired position and press Redeem (for PT) or Remove liquidity (for LP).
   3. For LP, redeem the PT you receive afterwards. Confirm and pay gas.

   Pendle app (opens in a new tab)Official docs (opens in a new tab)

5. Funds on shut-down Swellchain

   Swellchain, Swell

   $27 · 1 position

   Swell closed Swellchain: the final withdrawal deadline was 2026-06-15 and the chain was to run until 2026-06-30. Withdrawals started before 15 June can still be finalized on Ethereum.

   1. If your withdrawal was started before 15 June: after the 7-day proof wait, prove it on the Ethereum OptimismPortal2 0x758E0EE66102816F5C3Ec9ECc1188860fbb87812 (proveWithdrawalTransaction).
   2. Then call finalizeWithdrawalTransaction on the same contract. You pay ETH gas.
   3. If you never started one: Swell said contract withdrawals were possible until 30 June but are technical. Ask Swell support.

   Official bridges for the chains your positions are on:

   • Swell Superbridge UI (listed by Swellchain docs) (opens in a new tab)

   Official docs (opens in a new tab)

6. Lisk L2 balance (closing)

   $19 · 2 positions

   Lisk's own chain closes on 2026-10-31. Lisk says withdrawing to Ethereum takes about 8 days, and unstaking LSK adds 3 days. Start now.

   1. Open the Lisk bridge (type bridge.lisk.com yourself) and connect your wallet.
   2. Withdraw your assets to Ethereum. If you staked LSK, unlock it first and wait 3 days.
   3. After the wait, prove and finalize the withdrawal on Ethereum. You pay gas on both chains.

   Official bridges for the chains your positions are on:

   • Lisk Bridge (opens in a new tab)

   Lisk bridge (opens in a new tab)Official docs (opens in a new tab)

7. STG never swapped to ZRO

   Stargate / LayerZero

   $6 · 1 positionMay not work

   You hold STG that was never swapped to ZRO. The official redemption site gives 0.08634 ZRO per STG. LayerZero says conversions end on 15 December 2026.

   1. Open the STG Redemption site and connect the wallet that holds STG on Ethereum.
   2. Sign the Terms of Conversion message when asked, approve STG, then confirm the swap.
   3. Do this before 15 December 2026. Conversions are not supported after that date.
   4. Without the site: call swap(stgAmount, signature) on 0x921949cc006A563D76Abd111a3e4c2ACe2C4273f. The signature is of the Terms text.

   Stargate's STG to ZRO post on X (opens in a new tab)Official docs (opens in a new tab)

8. Funds in old Ethereum contracts (2015-2021)

   $5 · 2 positions

   You have a balance in an old Ethereum contract (The DAO, EtherDelta, IDEX, the 2017 ENS registrar, DigixDAO and others). Each contract has its own withdraw call. Use the wallet that owns the position.

   1. The DAO: on the DAO token 0xbb9bc244d798123fde783fcc1c72d3bb8c189413 call approve(0xbf4ed7b27f1d666546e30d74d50d173d20bca754, yourBalance). Then call withdraw() on the WithdrawDAO contract 0xbf4ed7b27f1d666546e30d74d50d173d20bca754. It pays 1 ETH per 100 DAO.
   2. EtherDelta 0x8d12a197cb00d4747a1fe03395095ce2a5cc6819: from the wallet that deposited, call withdraw(amount) for ETH or withdrawToken(token, amount) for a token. Amounts are in the token's smallest unit.
   3. IDEX v1 0x2a0c0dbecc7e4d658f48e01e3fa353f44050c208: call withdraw(token, amount). Use token 0x0000000000000000000000000000000000000000 for ETH. It reverts if your last IDEX activity was fewer than 240 blocks ago.
   4. 2017 ENS registrar 0x6090a6e47849629b7245dfa1ca21d94cd15878ef: call releaseDeed(labelhash) for the name. The labelhash is keccak256 of the name without .eth. The deposit goes back to the deed owner.
   5. Other contracts (DigixDAO, Neufund and more): use the contract's own withdraw or refund function on Etherscan from the owner wallet. Check the contract's code first.

   WithdrawDAO contract (The DAO) (opens in a new tab)Official docs (opens in a new tab)

9. Expired veBAL lock

   Balancer

   $4 · 1 position

   Your veBAL lock ended but you never withdrew. You get 80BAL-20WETH pool tokens back, not BAL.

   1. Open the veBAL contract on Etherscan and go to Write Contract.
   2. Connect the owner wallet and call withdraw().
   3. Then exit the Balancer 80/20 pool to get BAL and WETH.

   veBAL contract (opens in a new tab)Official docs (opens in a new tab)

10. Balancer v2 pool share

    $4 · 1 position

    You hold Balancer v2 pool tokens, in your wallet or staked. You can exit the pool. Balancer has proposed a wind-down: if it passes, pools become withdraw-only on 30 Oct 2026.

    1. Open the Balancer app, find your pool and use Remove liquidity. Do this before 30 Oct 2026.
    2. If the app does not work, call exitPool on the Balancer v2 Vault 0xBA12222222228d8Ba445958a75a0704d566BF2C8 (Etherscan, Write tab).
    3. If your tokens are staked in Aura, Beefy or a gauge, unstake there first.

    Balancer app (opens in a new tab)Official docs (opens in a new tab)

11. Polygon zkEVM balance

    $3 · 3 positions

    Polygon zkEVM's sequencer stopped on 1 July 2026. Wallet-held funds not bridged before then can be claimed on Ethereum in a claim UI. Polygon treats unclaimed assets as abandoned after 2027-12-31.

    1. Open the Polygon zkEVM claims site and connect the wallet that held the funds.
    2. Pick your balances and send the claim transaction on Ethereum.
    3. Funds locked inside DeFi contracts are not auto-migrated. Ask Polygon through the forum post.

    Official bridges for the chains your positions are on:

    • Agglayer bridge UI (opens in a new tab)

    zkEVM claims site (opens in a new tab)Official docs (opens in a new tab)

12. Orbit Lending deposit on Blast

    $3 · 1 position

    You supplied funds to Orbit Lending on Blast, which was exploited. You can still withdraw, but some markets hold less cash than is owed, so first come, first served.

    1. Open your cToken contract (listed in the row) on Blast's block explorer, Write tab, connect wallet.
    2. Call redeem(cTokenBalance) or redeemUnderlying(amount).
    3. If you have a borrow in the same market, repay it first; your collateral is locked until then.

    Compound v2 docs (same contract code) (opens in a new tab)

13. Seamless v1 deposit on Base

    $3 · 1 position

    You supplied funds to the Seamless v1 lending pool on Base (an Aave v3 fork). seamlessprotocol.com now redirects to X, but the pool contract still lets you withdraw.

    1. Open the pool contract 0x8F44Fd754285aa6A2b8B9B97739B79746e0475a7 on Basescan, Write tab, connect wallet.
    2. Call withdraw(asset, amount, to) with the token address, amount = max (type(uint256).max) and your wallet.
    3. If you have debt, repay() first or withdraw only the free part.

    Seamless v1 pool on Basescan (opens in a new tab)Official docs (opens in a new tab)

14. MKR never converted to SKY

    Maker / Sky

    $1 · 1 positionMay not work

    You hold MKR, or MKR in the old DSChief voting contract, that was never converted to SKY. The converter still works. Its fee is 5% now (read on-chain 2026-10-01) and rises 1 point every 3 months.

    1. Open the Sky app and connect your wallet.
    2. If your MKR is in the old DSChief voting contract, first call free(amount) on that contract.
    3. Approve MKR, then convert it to SKY. You get 24,000 SKY per MKR minus the fee.
    4. Without the app: call mkrToSky(usr, mkrAmt) on the converter 0xA1Ea1bA18E88C381C724a75F23a130420C403f9a.

    Sky app (opens in a new tab)Official docs (opens in a new tab)

15. Ionic Protocol deposit

    <$1 · 1 positionMay not work

    Ionic Protocol lending is shut down and ionic.money is now a domain for sale. Your deposit receipt (ionToken) may still be redeemable, only for the cash left, first come first served.

    1. Open the ionToken contract for your market and chain in the block explorer. Find the pool list with PoolDirectory.getAllPools().
    2. If you have an open loan, repay it first.
    3. Connect your wallet and call redeem or redeemUnderlying. You get at most the cash left in the market.

    Official docs (opens in a new tab)