Use only the official links below. No real recovery asks for your seed phrase or private key. If anyone offers to recover funds for you, it is a scam.

1. Balancer v3 pool share

   $1,069 · 5 positions

   You hold Balancer v3 pool tokens, in your wallet or staked. You can exit the pool. Under Balancer's wind-down proposal, the v3 Vault would pause on 30 Nov 2026, so withdraw before then.

   1. Open the Balancer app, find your pool and use Remove liquidity.
   2. If the pool is paused, anyone can call enableRecoveryMode(pool) on the v3 Vault 0xbA1333333333a1BA1108E8412f11850A5C319bA9. Then call removeLiquidityRecovery on the Router.
   3. If your tokens are staked in a gauge, Aura or Beefy, unstake there first.

   Balancer app (opens in a new tab)Official docs (opens in a new tab)

2. Funds in frozen StarkEx apps

   Sorare, Immutable X, ApeX Pro, edgeX v1, Myria

   $294 · 1 position

   Some StarkEx apps keep balances off-chain. A pending withdrawal can be claimed now. A deposit-only record cannot: the app operator must first publish data.

   1. Check the row type. A pending withdrawal can be claimed now; a deposit ledger row cannot.
   2. For a pending withdrawal, call withdraw with your owner key and asset type on the app's StarkEx contract (Etherscan). Funds go to your registered address.
   3. For a frozen app, the escape hatch needs the operator or data committee to publish state first. See the StarkWare docs.

   Official docs (opens in a new tab)

3. EigenLayer withdrawal not completed

   $172 · 2 positions

   You queued a withdrawal from EigenLayer and the waiting time has passed, but you never completed it. Only the withdrawer address can complete it.

   1. Open the EigenLayer app and connect the withdrawer wallet.
   2. Find your queued withdrawal and press Complete.
   3. Choose to receive the tokens (not re-deposit). Confirm and pay gas in ETH.

   EigenLayer app (opens in a new tab)

4. dYdX v3 balance

   $136 · 1 position

   dYdX v3 was shut down and its exchange was set to 'frozen' on Ethereum. Your USDC can still be taken out through the escape hatch, or withdrawn if already released.

   1. Open dYdX's v3 sunset post and use the Escape Hatch link in its last update. It is hosted by an independent third party.
   2. Escape needs a proof for your stark key and position. The page builds it; the escape call goes to StarkPerpetual 0xD54f502e184B6B739d7D27a6410a67dc462D69c8.
   3. Then call withdraw from your registered Ethereum address to receive the USDC. You pay Ethereum gas.

   dYdX StarkPerpetual contract (opens in a new tab)Official docs (opens in a new tab)

5. Polygon zkEVM balance

   $46 · 2 positions

   Polygon zkEVM's sequencer stopped on 1 July 2026. Wallet-held funds not bridged before then can be claimed on Ethereum in a claim UI. Polygon treats unclaimed assets as abandoned after 2027-12-31.

   1. Open the Polygon zkEVM claims site and connect the wallet that held the funds.
   2. Pick your balances and send the claim transaction on Ethereum.
   3. Funds locked inside DeFi contracts are not auto-migrated. Ask Polygon through the forum post.

   Official bridges for the chains your positions are on:

   • Agglayer bridge UI (opens in a new tab)

   zkEVM claims site (opens in a new tab)Official docs (opens in a new tab)

6. Ended Sablier stream not withdrawn

   $18 · 1 position

   A Sablier payment stream to you has ended or was canceled, and the tokens in it were never withdrawn. The tokens are still in the Sablier contract.

   1. Open the Sablier app and connect the wallet that owns the stream.
   2. Find the ended stream and press Withdraw.
   3. The tokens go to the stream recipient. Pay the gas fee.

   Sablier app (opens in a new tab)Official docs (opens in a new tab)

7. Balancer v2 pool share

   $16 · 1 position

   You hold Balancer v2 pool tokens, in your wallet or staked. You can exit the pool. Balancer has proposed a wind-down: if it passes, pools become withdraw-only on 30 Oct 2026.

   1. Open the Balancer app, find your pool and use Remove liquidity. Do this before 30 Oct 2026.
   2. If the app does not work, call exitPool on the Balancer v2 Vault 0xBA12222222228d8Ba445958a75a0704d566BF2C8 (Etherscan, Write tab).
   3. If your tokens are staked in Aura, Beefy or a gauge, unstake there first.

   Balancer app (opens in a new tab)Official docs (opens in a new tab)

8. K2 (Karak) chain balance

   $10 · 1 positionNeeds the team

   The K2 team's bridge on Ethereum now pays balances by Merkle proof (a list that proves your balance). The merkle root is set and claims are not paused. After 2027-09-12 the guardian can sweep what is left.

   1. Ask the K2 team for your Merkle proof. We could not find an official page that gives proofs.
   2. On the OptimismPortal 0xeeCE9CD7Abd1CC84d9dfc7493e7e68079E47eA73 call claimETH(_amount, _proof) for ETH.
   3. For tokens, call claimTokens(_tokens, _amounts, _proof) on the L1StandardBridge 0xBA61F25dd9f2d5f02D01B1C2c1c5F0B14c4B48A3.

   K2 OptimismPortal on Etherscan (opens in a new tab)

9. Alpaca staked ibTokens (FairLaunch)

   Alpaca Finance

   $8 · 1 position

   You staked Alpaca ibTokens in the old FairLaunch farm on BNB Chain. The app is gone but the contract lets you take them out. The ibUSDC pool (pid 24) may not pay.

   1. Open FairLaunch 0xA625AB01B08ce023B2a342Dbb12a16f2C8489A8F on BscScan, Write Contract.
   2. Call withdrawAll(user, pid) with your address and the pool id, or emergencyWithdraw(pid).
   3. Then call withdraw(shares) on the ibToken vault to get the base token. Contract wallets must send from the contract.

   FairLaunch on BscScan (opens in a new tab)

10. Seamless v1 deposit on Base

    $6 · 1 position

    You supplied funds to the Seamless v1 lending pool on Base (an Aave v3 fork). seamlessprotocol.com now redirects to X, but the pool contract still lets you withdraw.

    1. Open the pool contract 0x8F44Fd754285aa6A2b8B9B97739B79746e0475a7 on Basescan, Write tab, connect wallet.
    2. Call withdraw(asset, amount, to) with the token address, amount = max (type(uint256).max) and your wallet.
    3. If you have debt, repay() first or withdraw only the free part.

    Seamless v1 pool on Basescan (opens in a new tab)Official docs (opens in a new tab)

11. Archived L2 bridge funds

    Archived L2s

    $5 · 1 positionMay not work

    This chain shut down and its state is gone, so no one can prove a withdrawal now. The Ethereum bridge still holds the money; only the chain team can release it.

    1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
    2. Check that chain's official site for a refund or recovery notice.
    3. Without the chain's final state nobody can prove a withdrawal. Only the chain team can release the bridge funds.

    Official bridges for the chains your positions are on:

    • Redstone balance claim (opens in a new tab)

12. zkSync Lite balance not claimed

    $4 · 1 position

    zkSync Lite was shut down on 2026-05-04. Remaining balances are claimable on Ethereum through a claim contract and a withdrawal portal. Your account is on that list and has not claimed.

    1. Open the zkSync Lite withdrawal portal and connect the wallet that owned the account.
    2. The portal finds your address in the final state, builds the proof and sends the claim. Follow its prompts.
    3. Confirm the Ethereum transaction. Tokens go to your L1 address. Matter Labs sponsors gas for the first 100,000 withdrawals.

    zkSync Lite withdrawal portal (opens in a new tab)Official docs (opens in a new tab)

13. Funds on shut-down Swellchain

    Swellchain, Swell

    $2 · 1 position

    Swell closed Swellchain: the final withdrawal deadline was 2026-06-15 and the chain was to run until 2026-06-30. Withdrawals started before 15 June can still be finalized on Ethereum.

    1. If your withdrawal was started before 15 June: after the 7-day proof wait, prove it on the Ethereum OptimismPortal2 0x758E0EE66102816F5C3Ec9ECc1188860fbb87812 (proveWithdrawalTransaction).
    2. Then call finalizeWithdrawalTransaction on the same contract. You pay ETH gas.
    3. If you never started one: Swell said contract withdrawals were possible until 30 June but are technical. Ask Swell support.

    Official bridges for the chains your positions are on:

    • Swell Superbridge UI (listed by Swellchain docs) (opens in a new tab)

    Official docs (opens in a new tab)

14. Nile (legacy, Linea) LP tokens

    $1 · 1 position

    Nile (legacy, Linea) is a closed exchange. Your liquidity-pool (LP) tokens still give a share of the tokens in the pair contract. The website is gone, so you use the contracts directly.

    1. Find the pair contract in the 'pair' column of your row. If your LP tokens are staked in a farm, withdraw them there first.
    2. Approve the LP tokens to this exchange's old router contract, then call removeLiquidity on it in the explorer's Write tab.
    3. Never send LP tokens to the pair by hand: anyone can call burn first and take them. If no router works, ask a developer.

    Uniswap v2 docs (same contract code) (opens in a new tab)

15. GMX v1 GLP staked

    $1 · 1 position

    You hold staked GLP, the liquidity token of GMX v1 (Arbitrum or Avalanche). GMX stopped v1 trading in July 2025; you can only sell existing GLP back for the underlying assets.

    1. Open v1.app.gmx.io, connect your wallet and use the Sell GLP page. If your GLP is staked, the page unstakes it as part of the sale.
    2. If the page fails, call unstakeAndRedeemGlp(tokenOut, glpAmount, minOut, receiver) on RewardRouterV2: Arbitrum 0xB95DB5B167D75e6d04227CfFFA61069348d271F5.
    3. GMX docs also mention claims for GLP holders in their distributions section. Rows marked as contracts (vesters, vaults) are unclear.

    GMX v1 app (opens in a new tab)Official docs (opens in a new tab)

16. Hyphen bridge funds stuck

    Biconomy Hyphen

    <$1 · 1 position

    Hyphen (Biconomy) is no longer supported. Liquidity provider positions may still be withdrawn from the contracts. Transfers that never arrived need the Biconomy team. We could not confirm this from official docs.

    1. If you provided liquidity, call removeLiquidity with your NFT id on the chain's LiquidityProviders contract on Etherscan (Write tab).
    2. For a farming NFT, first call withdraw(nftId, to) on the LiquidityFarming contract.
    3. If you sent a transfer that never arrived, contact Biconomy; only their executors can release it.

17. Ended Sablier stream (no price)

    $0 · 1 position

    An ended or canceled Sablier stream whose token has no known price. Most are airdrop vesting or spam tokens, so the value is unknown and may be zero.

    1. Open the Sablier app and connect the wallet that owns the stream.
    2. Press Withdraw on the ended stream if you want the tokens.
    3. Be careful with unknown tokens: many are spam.

    Sablier app (opens in a new tab)Official docs (opens in a new tab)