Use only the official links below. No real recovery asks for your seed phrase or private key. If anyone offers to recover funds for you, it is a scam.

1. Unclaimed Scroll withdrawal

   $27 · 1 position

   You withdrew from Scroll to Ethereum but never claimed on Ethereum. The funds wait in the bridge.

   1. Open the Scroll bridge and connect the wallet that withdrew.
   2. Wait until the batch with your withdrawal is finalized on Ethereum, then find the entry marked Claim in the withdraw history.
   3. Press Claim and pay the Ethereum gas fee.

   Official bridges for the chains your positions are on:

   • Scroll Portal bridge (opens in a new tab)

   Scroll bridge (opens in a new tab)Official docs (opens in a new tab)

2. Old Maker SCD vault collateral

   $14 · 2 positionsMay not work

   You own an old single-collateral Dai vault (CDP) that still has collateral (PETH) left after the system was shut down.

   1. Open the Tub contract 0x448a5065aeBB8E423F0896E6c5D525C040f59af3 on Etherscan, Write tab.
   2. If the vault still has debt, anyone can call bite(cupId) first. Then the vault owner calls free(cup, ink) to get PETH.
   3. Call exit(wad) to swap PETH for WETH. If a DSProxy owns the vault, send these calls through the proxy.

   Tub contract on Etherscan (opens in a new tab)

3. dYdX v3 balance

   $11 · 1 position

   dYdX v3 was shut down and its exchange was set to 'frozen' on Ethereum. Your USDC can still be taken out through the escape hatch, or withdrawn if already released.

   1. Open dYdX's v3 sunset post and use the Escape Hatch link in its last update. It is hosted by an independent third party.
   2. Escape needs a proof for your stark key and position. The page builds it; the escape call goes to StarkPerpetual 0xD54f502e184B6B739d7D27a6410a67dc462D69c8.
   3. Then call withdraw from your registered Ethereum address to receive the USDC. You pay Ethereum gas.

   dYdX StarkPerpetual contract (opens in a new tab)Official docs (opens in a new tab)

4. PoolTogether deposit still in pool

   $6 · 2 positions

   You deposited into a PoolTogether v3 or v4 prize pool and never withdrew. Your deposit is still in the pool contract.

   1. Open the prize pool contract (prize_pool address) on the block explorer.
   2. v4: call withdrawFrom(from, amount) with your address. v3: call withdrawInstantlyFrom(from, amount, controlledToken, maximumExitFee).
   3. v3 can charge an early-exit fee. Confirm and check your wallet.

   Official docs (opens in a new tab)

5. EigenLayer withdrawal not completed

   $6 · 2 positions

   You queued a withdrawal from EigenLayer and the waiting time has passed, but you never completed it. Only the withdrawer address can complete it.

   1. Open the EigenLayer app and connect the withdrawer wallet.
   2. Find your queued withdrawal and press Complete.
   3. Choose to receive the tokens (not re-deposit). Confirm and pay gas in ETH.

   EigenLayer app (opens in a new tab)

6. Polygon zkEVM balance

   $3 · 2 positions

   Polygon zkEVM's sequencer stopped on 1 July 2026. Wallet-held funds not bridged before then can be claimed on Ethereum in a claim UI. Polygon treats unclaimed assets as abandoned after 2027-12-31.

   1. Open the Polygon zkEVM claims site and connect the wallet that held the funds.
   2. Pick your balances and send the claim transaction on Ethereum.
   3. Funds locked inside DeFi contracts are not auto-migrated. Ask Polygon through the forum post.

   Official bridges for the chains your positions are on:

   • Agglayer bridge UI (opens in a new tab)

   zkEVM claims site (opens in a new tab)Official docs (opens in a new tab)

7. Unclaimed OP Stack chain withdrawal

   Blast, Mantle, Mode, Zora, Lisk, Ink, Unichain and other OP chains

   $1 · 15 positions

   You withdrew from an OP Stack chain to Ethereum but never completed the last step. The funds wait in that chain's bridge.

   1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
   2. Connect the receiving wallet and open your transactions. Press Prove, wait out the challenge period shown on the page, then press Finalize.
   3. Pay the Ethereum gas fee each time.

   Official bridges for the chains your positions are on:

   • Zora Energy Bridge (opens in a new tab)

   Official docs (opens in a new tab)

8. GMX v1 GLP staked

   <$1 · 1 positionMay not work

   You hold staked GLP, the liquidity token of GMX v1 (Arbitrum or Avalanche). GMX stopped v1 trading in July 2025; you can only sell existing GLP back for the underlying assets.

   1. Open v1.app.gmx.io, connect your wallet and use the Sell GLP page. If your GLP is staked, the page unstakes it as part of the sale.
   2. If the page fails, call unstakeAndRedeemGlp(tokenOut, glpAmount, minOut, receiver) on RewardRouterV2: Arbitrum 0xB95DB5B167D75e6d04227CfFFA61069348d271F5.
   3. GMX docs also mention claims for GLP holders in their distributions section. Rows marked as contracts (vesters, vaults) are unclear.

   GMX v1 app (opens in a new tab)Official docs (opens in a new tab)

9. MATIC never swapped to POL

   Polygon

   <$1 · 1 position

   You hold old MATIC on Ethereum that was never swapped to POL. The swap is 1 to 1. Polygon has not announced a deadline.

   1. Open the Polygon Portal upgrade page and connect your wallet. Switch the wallet to Ethereum.
   2. Approve the upgrade contract to use your MATIC.
   3. Confirm the migrate transaction to receive POL. You pay Ethereum gas.

   Polygon portal (opens in a new tab)Official docs (opens in a new tab)

10. Funds in old Ethereum contracts (2015-2021)

    <$1 · 2 positions

    You have a balance in an old Ethereum contract (The DAO, EtherDelta, IDEX, the 2017 ENS registrar, DigixDAO and others). Each contract has its own withdraw call. Use the wallet that owns the position.

    1. The DAO: on the DAO token 0xbb9bc244d798123fde783fcc1c72d3bb8c189413 call approve(0xbf4ed7b27f1d666546e30d74d50d173d20bca754, yourBalance). Then call withdraw() on the WithdrawDAO contract 0xbf4ed7b27f1d666546e30d74d50d173d20bca754. It pays 1 ETH per 100 DAO.
    2. EtherDelta 0x8d12a197cb00d4747a1fe03395095ce2a5cc6819: from the wallet that deposited, call withdraw(amount) for ETH or withdrawToken(token, amount) for a token. Amounts are in the token's smallest unit.
    3. IDEX v1 0x2a0c0dbecc7e4d658f48e01e3fa353f44050c208: call withdraw(token, amount). Use token 0x0000000000000000000000000000000000000000 for ETH. It reverts if your last IDEX activity was fewer than 240 blocks ago.
    4. 2017 ENS registrar 0x6090a6e47849629b7245dfa1ca21d94cd15878ef: call releaseDeed(labelhash) for the name. The labelhash is keccak256 of the name without .eth. The deposit goes back to the deed owner.
    5. Other contracts (DigixDAO, Neufund and more): use the contract's own withdraw or refund function on Etherscan from the owner wallet. Check the contract's code first.

    WithdrawDAO contract (The DAO) (opens in a new tab)Official docs (opens in a new tab)

11. Lisk L2 balance (closing)

    <$1 · 1 position

    Lisk's own chain closes on 2026-10-31. Lisk says withdrawing to Ethereum takes about 8 days, and unstaking LSK adds 3 days. Start now.

    1. Open the Lisk bridge (type bridge.lisk.com yourself) and connect your wallet.
    2. Withdraw your assets to Ethereum. If you staked LSK, unlock it first and wait 3 days.
    3. After the wait, prove and finalize the withdrawal on Ethereum. You pay gas on both chains.

    Official bridges for the chains your positions are on:

    • Lisk Bridge (opens in a new tab)

    Lisk bridge (opens in a new tab)Official docs (opens in a new tab)

12. Old SAI stablecoin to cash out

    Maker SAI

    <$1 · 1 positionMay not work

    SAI (the first Dai) was shut down. Each SAI can still be cashed for a fixed amount of WETH: 0.0052856 WETH per SAI (read from the contract).

    1. Approve first: on the SAI token 0x89d24A6b4CcB1B6fAA2625fE562bDD9a23260359 call approve(spender = 0xBda109309f9FafA6Dd6A9CB9f1Df4085B27Ee8eF, amount).
    2. Open the SaiTap contract 0xBda109309f9FafA6Dd6A9CB9f1Df4085B27Ee8eF on Etherscan, Write tab, and connect your wallet.
    3. Call cash(wad) with your SAI amount. You receive WETH.

    SaiTap contract (opens in a new tab)

13. Mooniswap (1inch) LP tokens

    Mooniswap (1inch AMM, Ethereum)

    <$1 · 1 positionMay not work

    Mooniswap was a 1inch exchange on Ethereum. Your LP tokens give you a share of the tokens in the pool, and the pool can still pay out.

    1. Find your pool with getAllPools() on factory 0xbAF9A5d4b0052359326A6CDAb54BABAa3a3A9643 (v1) or 0x71CD6666064C3A1354a3B4dca5fA1E2D3ee7D303 (v2), and open it in the explorer.
    2. If the LP tokens are staked in a farm, unstake them first.
    3. Call withdraw(amount, minReturns) from your wallet.

    Official docs (opens in a new tab)