Use only the official links below. No real recovery asks for your seed phrase or private key. If anyone offers to recover funds for you, it is a scam.

1. Unfinished zkSync withdrawal

   zkSync Era

   $434 · 2 positions

   You started a withdrawal from zkSync Era (or a similar ZK Stack chain) to Ethereum, but never finalized it on Ethereum. The money sits in the L1 bridge.

   1. Open the ZKsync bridge and connect your wallet.
   2. Find the withdrawal that is ready to finalize. Withdrawals are delayed about 3 hours after they are sent.
   3. Press Finalize and pay the Ethereum gas fee. The funds go to the receiver address.

   Official bridges for the chains your positions are on:

   • Sophon claim portal (opens in a new tab)

   zkSync Bridge (opens in a new tab)Official docs (opens in a new tab)

2. Karak withdrawal not finished

   $152 · 1 position

   You started a withdrawal from Karak and the delay is over, but you never finished it. Your tokens wait in the Karak contract for the withdrawer address.

   1. Open the Karak app and connect the withdrawer wallet.
   2. Find your pending withdrawal and finish or claim it.
   3. If the app does not show it, use the DelegationSupervisor 0xafa904152e04abff56701223118be2832a4449e0 on Etherscan (Write as Proxy tab) and call finishWithdraw with your withdrawal details from the startWithdraw event.

   Karak app (opens in a new tab)

3. Unclaimed OP Stack chain withdrawal

   Blast, Mantle, Mode, Zora, Lisk, Ink, Unichain and other OP chains

   $32 · 2 positions

   You withdrew from an OP Stack chain to Ethereum but never completed the last step. The funds wait in that chain's bridge.

   1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
   2. Connect the receiving wallet and open your transactions. Press Prove, wait out the challenge period shown on the page, then press Finalize.
   3. Pay the Ethereum gas fee each time.

   Official bridges for the chains your positions are on:

   • Swan Chain Bridge (opens in a new tab)
   • Hemi Tunnel app (opens in a new tab)

   Official docs (opens in a new tab)

4. K2 (Karak) chain balance

   $27 · 1 positionNeeds the team

   The K2 team's bridge on Ethereum now pays balances by Merkle proof (a list that proves your balance). The merkle root is set and claims are not paused. After 2027-09-12 the guardian can sweep what is left.

   1. Ask the K2 team for your Merkle proof. We could not find an official page that gives proofs.
   2. On the OptimismPortal 0xeeCE9CD7Abd1CC84d9dfc7493e7e68079E47eA73 call claimETH(_amount, _proof) for ETH.
   3. For tokens, call claimTokens(_tokens, _amounts, _proof) on the L1StandardBridge 0xBA61F25dd9f2d5f02D01B1C2c1c5F0B14c4B48A3.

   K2 OptimismPortal on Etherscan (opens in a new tab)

5. Polygon zkEVM balance

   $25 · 5 positions

   Polygon zkEVM's sequencer stopped on 1 July 2026. Wallet-held funds not bridged before then can be claimed on Ethereum in a claim UI. Polygon treats unclaimed assets as abandoned after 2027-12-31.

   1. Open the Polygon zkEVM claims site and connect the wallet that held the funds.
   2. Pick your balances and send the claim transaction on Ethereum.
   3. Funds locked inside DeFi contracts are not auto-migrated. Ask Polygon through the forum post.

   Official bridges for the chains your positions are on:

   • Agglayer bridge UI (opens in a new tab)

   zkEVM claims site (opens in a new tab)Official docs (opens in a new tab)

6. Nucleus vault shares

   Nucleus (BoringVault)

   $15 · 3 positions

   Nucleus deprecated its vaults on 19 Dec 2025 and the withdraw page is gone. You can redeem vault shares through the Teller contract, but only for assets the vault still holds.

   1. Read the Nucleus deprecation guide first.
   2. Check which tokens the vault still holds, and your vault token balance, on Etherscan (or the Plume explorer).
   3. On the vault's Teller contract, Write tab, call bulkWithdraw(withdrawAsset, shareAmount, minimumAssets, to). The guide says to use 0 for minimumAssets.

   Nucleus deprecation guide (opens in a new tab)Official docs (opens in a new tab)

7. Archived L2 bridge funds

   Archived L2s

   $4 · 2 positionsMay not work

   This chain shut down and its state is gone, so no one can prove a withdrawal now. The Ethereum bridge still holds the money; only the chain team can release it.

   1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
   2. Check that chain's official site for a refund or recovery notice.
   3. Without the chain's final state nobody can prove a withdrawal. Only the chain team can release the bridge funds.

   Official bridges for the chains your positions are on:

   • Redstone balance claim (opens in a new tab)

8. Splits or Zora rewards not withdrawn

   0xSplits, Zora

   $3 · 1 position

   Money was sent to you through 0xSplits, or you earned Zora creator or referral rewards, and it is still inside the contract waiting for you to withdraw.

   1. Splits: open SplitMain 0x2ed6c4B5dA6378c7897AC67Ba9e43102Feb694EE on Etherscan and call withdraw(account, withdrawETH, tokens[]) with your address. Anyone can call it.
   2. Zora: call withdraw(to, amount) on ProtocolRewards 0x7777777F279eba3d3Ad8F4E708545291A6fDBA8B (same address on Base and other Zora chains), from the account that earned the rewards.
   3. The Splits app (app.splits.org) can also help.

   Splits app (opens in a new tab)

9. Seamless v1 deposit on Base

   $2 · 1 position

   You supplied funds to the Seamless v1 lending pool on Base (an Aave v3 fork). seamlessprotocol.com now redirects to X, but the pool contract still lets you withdraw.

   1. Open the pool contract 0x8F44Fd754285aa6A2b8B9B97739B79746e0475a7 on Basescan, Write tab, connect wallet.
   2. Call withdraw(asset, amount, to) with the token address, amount = max (type(uint256).max) and your wallet.
   3. If you have debt, repay() first or withdraw only the free part.

   Seamless v1 pool on Basescan (opens in a new tab)Official docs (opens in a new tab)

10. ReactorFusion deposit (zkSync)

    ReactorFusion (zkSync)

    <$1 · 1 position

    ReactorFusion lending is shut down and the website is gone. Your deposit receipt token may still be redeemable, but only for the cash left in the market, after you repay any debt.

    1. Open the receipt token contract of your market (in your row) in the block explorer, Write tab, and connect your wallet.
    2. If you have an open loan, repay it first.
    3. Call redeem or redeemUnderlying (or withdraw, if the contract shows that name). You get at most the cash still in the market.
    4. Not tested by us. Pay the network fee in the chain's coin. A developer may be needed.

    Compound v2 docs (same contract code) (opens in a new tab)

11. Nile (legacy, Linea) LP tokens

    <$1 · 1 position

    Nile (legacy, Linea) is a closed exchange. Your liquidity-pool (LP) tokens still give a share of the tokens in the pair contract. The website is gone, so you use the contracts directly.

    1. Find the pair contract in the 'pair' column of your row. If your LP tokens are staked in a farm, withdraw them there first.
    2. Approve the LP tokens to this exchange's old router contract, then call removeLiquidity on it in the explorer's Write tab.
    3. Never send LP tokens to the pair by hand: anyone can call burn first and take them. If no router works, ask a developer.

    Uniswap v2 docs (same contract code) (opens in a new tab)

12. Gas deposit in EntryPoint

    ERC-4337 EntryPoint

    <$1 · 1 position

    A smart account or paymaster deposited gas money in the ERC-4337 EntryPoint contract and left it there. Plain wallets can take it out; smart contract accounts often cannot.

    1. Open the EntryPoint contract for your chain and version on the block explorer.
    2. From the deposit account, call withdrawTo with your receiving address and the amount.
    3. If the account is a smart contract, check that it has a function that calls withdrawTo; many do not. Stake needs unlockStake, then withdrawStake.

    Official docs (opens in a new tab)