Use only the official links below. No real recovery asks for your seed phrase or private key. If anyone offers to recover funds for you, it is a scam.

1. Symbiotic withdrawal not claimed

   $21 · 1 position

   You withdrew from a Symbiotic vault and the epoch has ended, but you never claimed the tokens. They wait in the vault for the claimer address.

   1. Open the Symbiotic app and connect the claimer wallet.
   2. Find the vault with a claimable withdrawal and press Claim.
   3. Confirm and pay gas in ETH.

   Symbiotic app (opens in a new tab)Official docs (opens in a new tab)

2. ETH in Blur Pool

   $15 · 1 position

   You deposited ETH into the Blur Pool to bid on NFTs and never took it out. 1 pool token equals 1 ETH and you can withdraw at any time.

   1. Open the Blur Pool contract on Etherscan and go to Write as Proxy or Write Contract.
   2. Connect the wallet that holds the balance.
   3. Call withdraw with the amount in wei (18 decimals), then confirm.

   Blur Pool contract (opens in a new tab)Official docs (opens in a new tab)

3. Thruster v3 position on Blast

   $15 · 8 positionsYou can claim$9May not work$6

   You hold a Thruster v3 liquidity position (an NFT) on Blast. Thruster has shut down, but the position contract still works.

   1. Open the position contract 0x434575EaEa081b735C985FA9bf63CD7b87e227F9 on Blastscan, Write tab, and connect the wallet that owns the NFT.
   2. Call decreaseLiquidity with your tokenId, the liquidity amount, amount0Min, amount1Min and a deadline. Thruster's old guide explains each field.
   3. Then call collect(tokenId, recipient, max, max) to receive the tokens. You can call burn(tokenId) afterwards to delete the empty NFT.
   4. If the NFT is not in your wallet, it may be locked in another contract such as Hyperlock. Withdraw it from there first.

   Thruster position manager (opens in a new tab)

4. Lisk L2 balance (closing)

   $14 · 6 positions

   Lisk's own chain closes on 2026-10-31. Lisk says withdrawing to Ethereum takes about 8 days, and unstaking LSK adds 3 days. Start now.

   1. Open the Lisk bridge (type bridge.lisk.com yourself) and connect your wallet.
   2. Withdraw your assets to Ethereum. If you staked LSK, unlock it first and wait 3 days.
   3. After the wait, prove and finalize the withdrawal on Ethereum. You pay gas on both chains.

   Official bridges for the chains your positions are on:

   • Lisk Bridge (opens in a new tab)

   Lisk bridge (opens in a new tab)Official docs (opens in a new tab)

5. Ionic Protocol deposit

   $13 · 3 positionsMay not work

   Ionic Protocol lending is shut down and ionic.money is now a domain for sale. Your deposit receipt (ionToken) may still be redeemable, only for the cash left, first come first served.

   1. Open the ionToken contract for your market and chain in the block explorer. Find the pool list with PoolDirectory.getAllPools().
   2. If you have an open loan, repay it first.
   3. Connect your wallet and call redeem or redeemUnderlying. You get at most the cash left in the market.

   Official docs (opens in a new tab)

6. Plasma pre-deposit vault shares

   Plasma (XPL pre-deposit vault)

   $9 · 1 position

   You hold shares of the Plasma USD Vault from the XPL sale or later deposits. They are still unredeemed and can be withdrawn for USDT0.

   1. Open the Plasma dashboard, connect your wallet and look for the vault in Portfolio or Savings.
   2. Press Withdraw on the vault and confirm. We could not confirm the exact screen for pre-deposit vault shares.
   3. On Ethereum: shares first need to be bridged to Plasma with the Teller contract.

   Plasma dashboard (opens in a new tab)Official docs (opens in a new tab)

7. Polygon zkEVM balance

   $9 · 3 positions

   Polygon zkEVM's sequencer stopped on 1 July 2026. Wallet-held funds not bridged before then can be claimed on Ethereum in a claim UI. Polygon treats unclaimed assets as abandoned after 2027-12-31.

   1. Open the Polygon zkEVM claims site and connect the wallet that held the funds.
   2. Pick your balances and send the claim transaction on Ethereum.
   3. Funds locked inside DeFi contracts are not auto-migrated. Ask Polygon through the forum post.

   Official bridges for the chains your positions are on:

   • Agglayer bridge UI (opens in a new tab)

   zkEVM claims site (opens in a new tab)Official docs (opens in a new tab)

8. Expired Pendle position

   $5 · 3 positions

   You hold Pendle PT or LP tokens from a market that has expired. They can be redeemed for the underlying asset at any time.

   1. Open the Pendle app, connect your wallet, and go to Portfolio.
   2. Find the expired position and press Redeem (for PT) or Remove liquidity (for LP).
   3. For LP, redeem the PT you receive afterwards. Confirm and pay gas.

   Pendle app (opens in a new tab)Official docs (opens in a new tab)

9. Seamless v1 deposit on Base

   $5 · 2 positions

   You supplied funds to the Seamless v1 lending pool on Base (an Aave v3 fork). seamlessprotocol.com now redirects to X, but the pool contract still lets you withdraw.

   1. Open the pool contract 0x8F44Fd754285aa6A2b8B9B97739B79746e0475a7 on Basescan, Write tab, connect wallet.
   2. Call withdraw(asset, amount, to) with the token address, amount = max (type(uint256).max) and your wallet.
   3. If you have debt, repay() first or withdraw only the free part.

   Seamless v1 pool on Basescan (opens in a new tab)Official docs (opens in a new tab)

10. Balancer v3 pool share

    $3 · 1 position

    You hold Balancer v3 pool tokens, in your wallet or staked. You can exit the pool. Under Balancer's wind-down proposal, the v3 Vault would pause on 30 Nov 2026, so withdraw before then.

    1. Open the Balancer app, find your pool and use Remove liquidity.
    2. If the pool is paused, anyone can call enableRecoveryMode(pool) on the v3 Vault 0xbA1333333333a1BA1108E8412f11850A5C319bA9. Then call removeLiquidityRecovery on the Router.
    3. If your tokens are staked in a gauge, Aura or Beefy, unstake there first.

    Balancer app (opens in a new tab)Official docs (opens in a new tab)

11. Orbit Lending deposit on Blast

    $2 · 1 position

    You supplied funds to Orbit Lending on Blast, which was exploited. You can still withdraw, but some markets hold less cash than is owed, so first come, first served.

    1. Open your cToken contract (listed in the row) on Blast's block explorer, Write tab, connect wallet.
    2. Call redeem(cTokenBalance) or redeemUnderlying(amount).
    3. If you have a borrow in the same market, repay it first; your collateral is locked until then.

    Compound v2 docs (same contract code) (opens in a new tab)

12. Funds on shut-down Swellchain

    Swellchain, Swell

    $2 · 1 position

    Swell closed Swellchain: the final withdrawal deadline was 2026-06-15 and the chain was to run until 2026-06-30. Withdrawals started before 15 June can still be finalized on Ethereum.

    1. If your withdrawal was started before 15 June: after the 7-day proof wait, prove it on the Ethereum OptimismPortal2 0x758E0EE66102816F5C3Ec9ECc1188860fbb87812 (proveWithdrawalTransaction).
    2. Then call finalizeWithdrawalTransaction on the same contract. You pay ETH gas.
    3. If you never started one: Swell said contract withdrawals were possible until 30 June but are technical. Ask Swell support.

    Official bridges for the chains your positions are on:

    • Swell Superbridge UI (listed by Swellchain docs) (opens in a new tab)

    Official docs (opens in a new tab)

13. GMX v1 GLP staked

    $2 · 1 position

    You hold staked GLP, the liquidity token of GMX v1 (Arbitrum or Avalanche). GMX stopped v1 trading in July 2025; you can only sell existing GLP back for the underlying assets.

    1. Open v1.app.gmx.io, connect your wallet and use the Sell GLP page. If your GLP is staked, the page unstakes it as part of the sale.
    2. If the page fails, call unstakeAndRedeemGlp(tokenOut, glpAmount, minOut, receiver) on RewardRouterV2: Arbitrum 0xB95DB5B167D75e6d04227CfFFA61069348d271F5.
    3. GMX docs also mention claims for GLP holders in their distributions section. Rows marked as contracts (vesters, vaults) are unclear.

    GMX v1 app (opens in a new tab)Official docs (opens in a new tab)

14. Balancer v2 pool share

    $1 · 2 positions

    You hold Balancer v2 pool tokens, in your wallet or staked. You can exit the pool. Balancer has proposed a wind-down: if it passes, pools become withdraw-only on 30 Oct 2026.

    1. Open the Balancer app, find your pool and use Remove liquidity. Do this before 30 Oct 2026.
    2. If the app does not work, call exitPool on the Balancer v2 Vault 0xBA12222222228d8Ba445958a75a0704d566BF2C8 (Etherscan, Write tab).
    3. If your tokens are staked in Aura, Beefy or a gauge, unstake there first.

    Balancer app (opens in a new tab)Official docs (opens in a new tab)

15. Archived L2 bridge funds

    Archived L2s

    <$1 · 2 positionsMay not work

    This chain shut down and its state is gone, so no one can prove a withdrawal now. The Ethereum bridge still holds the money; only the chain team can release it.

    1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
    2. Check that chain's official site for a refund or recovery notice.
    3. Without the chain's final state nobody can prove a withdrawal. Only the chain team can release the bridge funds.

16. Expired veBAL lock

    Balancer

    <$1 · 1 position

    Your veBAL lock ended but you never withdrew. You get 80BAL-20WETH pool tokens back, not BAL.

    1. Open the veBAL contract on Etherscan and go to Write Contract.
    2. Connect the owner wallet and call withdraw().
    3. Then exit the Balancer 80/20 pool to get BAL and WETH.

    veBAL contract (opens in a new tab)Official docs (opens in a new tab)