Use only the official links below. No real recovery asks for your seed phrase or private key. If anyone offers to recover funds for you, it is a scam.

1. LayerZero transfer stuck

   LayerZero (OFT tokens)

   $84 · 1 position

   Your LayerZero token transfer arrived on the destination chain but its message was never run. Anyone can retry it, and the tokens go to you.

   1. Look up your transaction on LayerZero Scan and note the message status.
   2. v2: LayerZero Scan can execute a stuck message from its page, or call lzReceive on EndpointV2 0x1a44076050125825900e736c501f859c50fE728c (permissionless).
   3. v1: call retryPayload on the chain's Endpoint contract (explorer Write tab). You pay gas. An empty token adapter needs the app team.

   LayerZero Scan (opens in a new tab)Official docs (opens in a new tab)

2. Unclaimed Starknet withdrawal

   StarkGate (Starknet)

   $27 · 1 position

   You withdrew from Starknet to Ethereum but never ran the last step on Ethereum. The funds wait in the StarkGate bridge.

   1. Open StarkGate and connect the receiving wallet.
   2. Open Withdraw history and find the withdrawal ready to claim.
   3. Press Complete or Claim and pay the Ethereum gas fee.

   StarkGate (opens in a new tab)Official docs (opens in a new tab)

3. dYdX v3 balance

   $16 · 1 position

   dYdX v3 was shut down and its exchange was set to 'frozen' on Ethereum. Your USDC can still be taken out through the escape hatch, or withdrawn if already released.

   1. Open dYdX's v3 sunset post and use the Escape Hatch link in its last update. It is hosted by an independent third party.
   2. Escape needs a proof for your stark key and position. The page builds it; the escape call goes to StarkPerpetual 0xD54f502e184B6B739d7D27a6410a67dc462D69c8.
   3. Then call withdraw from your registered Ethereum address to receive the USDC. You pay Ethereum gas.

   dYdX StarkPerpetual contract (opens in a new tab)Official docs (opens in a new tab)

4. Unclaimed OP Stack chain withdrawal

   Blast, Mantle, Mode, Zora, Lisk, Ink, Unichain and other OP chains

   $12 · 1 position

   You withdrew from an OP Stack chain to Ethereum but never completed the last step. The funds wait in that chain's bridge.

   1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
   2. Connect the receiving wallet and open your transactions. Press Prove, wait out the challenge period shown on the page, then press Finalize.
   3. Pay the Ethereum gas fee each time.

   Official bridges for the chains your positions are on:

   • Superbridge (Ink) (listed by Ink docs) (opens in a new tab)

   Official docs (opens in a new tab)

5. Polygon zkEVM balance

   $10 · 3 positions

   Polygon zkEVM's sequencer stopped on 1 July 2026. Wallet-held funds not bridged before then can be claimed on Ethereum in a claim UI. Polygon treats unclaimed assets as abandoned after 2027-12-31.

   1. Open the Polygon zkEVM claims site and connect the wallet that held the funds.
   2. Pick your balances and send the claim transaction on Ethereum.
   3. Funds locked inside DeFi contracts are not auto-migrated. Ask Polygon through the forum post.

   Official bridges for the chains your positions are on:

   • Agglayer bridge UI (opens in a new tab)

   zkEVM claims site (opens in a new tab)Official docs (opens in a new tab)

6. Funds in frozen StarkEx apps

   Sorare, Immutable X, ApeX Pro, edgeX v1, Myria

   $8 · 1 position

   Some StarkEx apps keep balances off-chain. A pending withdrawal can be claimed now. A deposit-only record cannot: the app operator must first publish data.

   1. Check the row type. A pending withdrawal can be claimed now; a deposit ledger row cannot.
   2. For a pending withdrawal, call withdraw with your owner key and asset type on the app's StarkEx contract (Etherscan). Funds go to your registered address.
   3. For a frozen app, the escape hatch needs the operator or data committee to publish state first. See the StarkWare docs.

   Official docs (opens in a new tab)

7. zkSync Lite balance not claimed

   $8 · 1 position

   zkSync Lite was shut down on 2026-05-04. Remaining balances are claimable on Ethereum through a claim contract and a withdrawal portal. Your account is on that list and has not claimed.

   1. Open the zkSync Lite withdrawal portal and connect the wallet that owned the account.
   2. The portal finds your address in the final state, builds the proof and sends the claim. Follow its prompts.
   3. Confirm the Ethereum transaction. Tokens go to your L1 address. Matter Labs sponsors gas for the first 100,000 withdrawals.

   zkSync Lite withdrawal portal (opens in a new tab)Official docs (opens in a new tab)

8. Seamless v1 deposit on Base

   $7 · 2 positionsMay not work

   You supplied funds to the Seamless v1 lending pool on Base (an Aave v3 fork). seamlessprotocol.com now redirects to X, but the pool contract still lets you withdraw.

   1. Open the pool contract 0x8F44Fd754285aa6A2b8B9B97739B79746e0475a7 on Basescan, Write tab, connect wallet.
   2. Call withdraw(asset, amount, to) with the token address, amount = max (type(uint256).max) and your wallet.
   3. If you have debt, repay() first or withdraw only the free part.

   Seamless v1 pool on Basescan (opens in a new tab)Official docs (opens in a new tab)

9. Ionic Protocol deposit

   $5 · 1 positionMay not work

   Ionic Protocol lending is shut down and ionic.money is now a domain for sale. Your deposit receipt (ionToken) may still be redeemable, only for the cash left, first come first served.

   1. Open the ionToken contract for your market and chain in the block explorer. Find the pool list with PoolDirectory.getAllPools().
   2. If you have an open loan, repay it first.
   3. Connect your wallet and call redeem or redeemUnderlying. You get at most the cash left in the market.

   Official docs (opens in a new tab)

10. Expired Pendle position

    $2 · 2 positionsMay not work

    You hold Pendle PT or LP tokens from a market that has expired. They can be redeemed for the underlying asset at any time.

    1. Open the Pendle app, connect your wallet, and go to Portfolio.
    2. Find the expired position and press Redeem (for PT) or Remove liquidity (for LP).
    3. For LP, redeem the PT you receive afterwards. Confirm and pay gas.

    Pendle app (opens in a new tab)Official docs (opens in a new tab)

11. Lisk L2 balance (closing)

    $2 · 2 positions

    Lisk's own chain closes on 2026-10-31. Lisk says withdrawing to Ethereum takes about 8 days, and unstaking LSK adds 3 days. Start now.

    1. Open the Lisk bridge (type bridge.lisk.com yourself) and connect your wallet.
    2. Withdraw your assets to Ethereum. If you staked LSK, unlock it first and wait 3 days.
    3. After the wait, prove and finalize the withdrawal on Ethereum. You pay gas on both chains.

    Official bridges for the chains your positions are on:

    • Lisk Bridge (opens in a new tab)

    Lisk bridge (opens in a new tab)Official docs (opens in a new tab)

12. Balancer v2 pool share

    <$1 · 1 position

    You hold Balancer v2 pool tokens, in your wallet or staked. You can exit the pool. Balancer has proposed a wind-down: if it passes, pools become withdraw-only on 30 Oct 2026.

    1. Open the Balancer app, find your pool and use Remove liquidity. Do this before 30 Oct 2026.
    2. If the app does not work, call exitPool on the Balancer v2 Vault 0xBA12222222228d8Ba445958a75a0704d566BF2C8 (Etherscan, Write tab).
    3. If your tokens are staked in Aura, Beefy or a gauge, unstake there first.

    Balancer app (opens in a new tab)Official docs (opens in a new tab)

13. Funds on shut-down Swellchain

    Swellchain, Swell

    <$1 · 1 position

    Swell closed Swellchain: the final withdrawal deadline was 2026-06-15 and the chain was to run until 2026-06-30. Withdrawals started before 15 June can still be finalized on Ethereum.

    1. If your withdrawal was started before 15 June: after the 7-day proof wait, prove it on the Ethereum OptimismPortal2 0x758E0EE66102816F5C3Ec9ECc1188860fbb87812 (proveWithdrawalTransaction).
    2. Then call finalizeWithdrawalTransaction on the same contract. You pay ETH gas.
    3. If you never started one: Swell said contract withdrawals were possible until 30 June but are technical. Ask Swell support.

    Official bridges for the chains your positions are on:

    • Swell Superbridge UI (listed by Swellchain docs) (opens in a new tab)

    Official docs (opens in a new tab)

14. Nucleus vault shares

    Nucleus (BoringVault)

    <$1 · 1 position

    Nucleus deprecated its vaults on 19 Dec 2025 and the withdraw page is gone. You can redeem vault shares through the Teller contract, but only for assets the vault still holds.

    1. Read the Nucleus deprecation guide first.
    2. Check which tokens the vault still holds, and your vault token balance, on Etherscan (or the Plume explorer).
    3. On the vault's Teller contract, Write tab, call bulkWithdraw(withdrawAsset, shareAmount, minimumAssets, to). The guide says to use 0 for minimumAssets.

    Nucleus deprecation guide (opens in a new tab)Official docs (opens in a new tab)