Use only the official links below. No real recovery asks for your seed phrase or private key. If anyone offers to recover funds for you, it is a scam.

1. zkSync Lite balance not claimed

   $114 · 3 positions

   zkSync Lite was shut down on 2026-05-04. Remaining balances are claimable on Ethereum through a claim contract and a withdrawal portal. Your account is on that list and has not claimed.

   1. Open the zkSync Lite withdrawal portal and connect the wallet that owned the account.
   2. The portal finds your address in the final state, builds the proof and sends the claim. Follow its prompts.
   3. Confirm the Ethereum transaction. Tokens go to your L1 address. Matter Labs sponsors gas for the first 100,000 withdrawals.

   zkSync Lite withdrawal portal (opens in a new tab)Official docs (opens in a new tab)

2. Hop transfer not received

   Hop Protocol

   $27 · 1 position

   You sent a Hop transfer long ago and it was never paid out on the destination chain. The funds are still in Hop's bridge contract and its withdraw function still works, but Hop's website and data service are gone, so there is no ready tool: the withdrawal has to be built from on-chain data.

   1. hop.exchange and every address under it (app.hop.exchange, docs.hop.exchange) no longer belong to Hop: hop.exchange now shows a gambling site. Do not open them or connect a wallet there.
   2. Find your transfer in the TransferSent event of your transaction on the origin chain (block explorer, Logs tab). It holds the transfer ID, recipient, amount, transferNonce, bonderFee and the swap values.
   3. The withdraw function also needs a Merkle proof of your transfer. Hop's open-source node tool has a withdrawal-proof command for it, but the tool reads Hop's data service at subgraph.hop.exchange, which no longer answers, so a developer has to point it at another source or rebuild the proof from on-chain events.
   4. With the proof, call withdraw on the Hop bridge contract of the destination chain (block explorer, Write tab) from the wallet that should receive the funds. You pay gas.
   5. On a Layer 2 destination you receive hTokens (for example hUSDC). They can be swapped to the native token in Hop's AMM on that chain.

   Hop's open-source node tool (GitHub) (opens in a new tab)Hop bridge contract (withdraw function) (opens in a new tab)

3. Lisk L2 balance (closing)

   $8 · 4 positions

   Lisk's own chain closes on 2026-10-31. Lisk says withdrawing to Ethereum takes about 8 days, and unstaking LSK adds 3 days. Start now.

   1. Open the Lisk bridge (type bridge.lisk.com yourself) and connect your wallet.
   2. Withdraw your assets to Ethereum. If you staked LSK, unlock it first and wait 3 days.
   3. After the wait, prove and finalize the withdrawal on Ethereum. You pay gas on both chains.

   Official bridges for the chains your positions are on:

   • Lisk Bridge (opens in a new tab)

   Lisk bridge (opens in a new tab)Official docs (opens in a new tab)

4. K2 (Karak) chain balance

   $3 · 1 positionNeeds the team

   The K2 team's bridge on Ethereum now pays balances by Merkle proof (a list that proves your balance). The merkle root is set and claims are not paused. After 2027-09-12 the guardian can sweep what is left.

   1. Ask the K2 team for your Merkle proof. We could not find an official page that gives proofs.
   2. On the OptimismPortal 0xeeCE9CD7Abd1CC84d9dfc7493e7e68079E47eA73 call claimETH(_amount, _proof) for ETH.
   3. For tokens, call claimTokens(_tokens, _amounts, _proof) on the L1StandardBridge 0xBA61F25dd9f2d5f02D01B1C2c1c5F0B14c4B48A3.

   K2 OptimismPortal on Etherscan (opens in a new tab)

5. Polygon zkEVM balance

   $1 · 3 positions

   Polygon zkEVM's sequencer stopped on 1 July 2026. Wallet-held funds not bridged before then can be claimed on Ethereum in a claim UI. Polygon treats unclaimed assets as abandoned after 2027-12-31.

   1. Open the Polygon zkEVM claims site and connect the wallet that held the funds.
   2. Pick your balances and send the claim transaction on Ethereum.
   3. Funds locked inside DeFi contracts are not auto-migrated. Ask Polygon through the forum post.

   Official bridges for the chains your positions are on:

   • Agglayer bridge UI (opens in a new tab)

   zkEVM claims site (opens in a new tab)Official docs (opens in a new tab)

6. Unclaimed Polygon PoS withdrawal

   Polygon PoS bridge

   <$1 · 1 position

   You burned tokens on Polygon to withdraw to Ethereum, and the checkpoint is done, but the exit was never run on Ethereum. The tokens wait in the bridge.

   1. Open Polygon Portal and connect the wallet that withdrew.
   2. Find the withdrawal in your transactions and press Initiate Claim.
   3. Approve in your wallet, then press Claim Tokens. Pay the Ethereum gas fee. The tokens go to the burner address.

   Polygon bridge (opens in a new tab)Official docs (opens in a new tab)

7. Archived L2 bridge funds

   Archived L2s

   <$1 · 1 positionMay not work

   This chain shut down and its state is gone, so no one can prove a withdrawal now. The Ethereum bridge still holds the money; only the chain team can release it.

   1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
   2. Check that chain's official site for a refund or recovery notice.
   3. Without the chain's final state nobody can prove a withdrawal. Only the chain team can release the bridge funds.

   Official bridges for the chains your positions are on:

   • Redstone balance claim (opens in a new tab)

8. Saddle pool liquidity

   Saddle Finance

   <$1 · 1 position

   Saddle Finance is closed, but its pools still hold your share. Some pools cannot be exited because a Synthetix token in them is suspended; only Synthetix or Saddle can fix those.

   1. If your LP tokens are in a Saddle gauge, withdraw them from the gauge first.
   2. Approve the LP token to the pool, then on the pool contract's Write tab call removeLiquidity(amount, minAmounts, deadline).
   3. If your row says blocked, the exit will fail until Synthetix or Saddle acts.

   Official docs (opens in a new tab)

9. Thruster v3 position on Blast

   <$1 · 1 position

   You hold a Thruster v3 liquidity position (an NFT) on Blast. Thruster has shut down, but the position contract still works.

   1. Open the position contract 0x434575EaEa081b735C985FA9bf63CD7b87e227F9 on Blastscan, Write tab, and connect the wallet that owns the NFT.
   2. Call decreaseLiquidity with your tokenId, the liquidity amount, amount0Min, amount1Min and a deadline. Thruster's old guide explains each field.
   3. Then call collect(tokenId, recipient, max, max) to receive the tokens. You can call burn(tokenId) afterwards to delete the empty NFT.
   4. If the NFT is not in your wallet, it may be locked in another contract such as Hyperlock. Withdraw it from there first.

   Thruster position manager (opens in a new tab)

10. Splits or Zora rewards not withdrawn

    0xSplits, Zora

    <$1 · 1 position

    Money was sent to you through 0xSplits, or you earned Zora creator or referral rewards, and it is still inside the contract waiting for you to withdraw.

    1. Splits: open SplitMain 0x2ed6c4B5dA6378c7897AC67Ba9e43102Feb694EE on Etherscan and call withdraw(account, withdrawETH, tokens[]) with your address. Anyone can call it.
    2. Zora: call withdraw(to, amount) on ProtocolRewards 0x7777777F279eba3d3Ad8F4E708545291A6fDBA8B (same address on Base and other Zora chains), from the account that earned the rewards.
    3. The Splits app (app.splits.org) can also help.

    Splits app (opens in a new tab)

11. Funds in old Ethereum contracts (2015-2021)

    <$1 · 1 position

    You have a balance in an old Ethereum contract (The DAO, EtherDelta, IDEX, the 2017 ENS registrar, DigixDAO and others). Each contract has its own withdraw call. Use the wallet that owns the position.

    1. The DAO: on the DAO token 0xbb9bc244d798123fde783fcc1c72d3bb8c189413 call approve(0xbf4ed7b27f1d666546e30d74d50d173d20bca754, yourBalance). Then call withdraw() on the WithdrawDAO contract 0xbf4ed7b27f1d666546e30d74d50d173d20bca754. It pays 1 ETH per 100 DAO.
    2. EtherDelta 0x8d12a197cb00d4747a1fe03395095ce2a5cc6819: from the wallet that deposited, call withdraw(amount) for ETH or withdrawToken(token, amount) for a token. Amounts are in the token's smallest unit.
    3. IDEX v1 0x2a0c0dbecc7e4d658f48e01e3fa353f44050c208: call withdraw(token, amount). Use token 0x0000000000000000000000000000000000000000 for ETH. It reverts if your last IDEX activity was fewer than 240 blocks ago.
    4. 2017 ENS registrar 0x6090a6e47849629b7245dfa1ca21d94cd15878ef: call releaseDeed(labelhash) for the name. The labelhash is keccak256 of the name without .eth. The deposit goes back to the deed owner.
    5. Other contracts (DigixDAO, Neufund and more): use the contract's own withdraw or refund function on Etherscan from the owner wallet. Check the contract's code first.

    WithdrawDAO contract (The DAO) (opens in a new tab)Official docs (opens in a new tab)

12. Across deposit never filled

    $0 · 1 positionMay not work

    You sent a deposit through Across but nobody filled it on the other chain. Expired deposits are refunded by Across in batches. If no refund arrived long after expiry, contact Across support.

    1. Find your deposit transaction hash on the origin chain explorer.
    2. Look up the hash in the Across Deposit Status Tracker (linked in the Across docs). Status 'expired' means the refund is queued.
    3. Refunds go through batches that take several hours. If nothing arrives long after expiry, send the hash to Across support.
    4. No refund address was set? The refund goes to the depositor address.

    Across (opens in a new tab)Official docs (opens in a new tab)