Use only the official links below. No real recovery asks for your seed phrase or private key. If anyone offers to recover funds for you, it is a scam.

1. Gas deposit in EntryPoint

   ERC-4337 EntryPoint

   $51 · 2 positionsMay not work

   A smart account or paymaster deposited gas money in the ERC-4337 EntryPoint contract and left it there. Plain wallets can take it out; smart contract accounts often cannot.

   1. Open the EntryPoint contract for your chain and version on the block explorer.
   2. From the deposit account, call withdrawTo with your receiving address and the amount.
   3. If the account is a smart contract, check that it has a function that calls withdrawTo; many do not. Stake needs unlockStake, then withdrawStake.

   Official docs (opens in a new tab)

2. Unfinished opBNB withdrawal

   $31 · 1 position

   You withdrew from opBNB to BNB Smart Chain but the proof or final step never happened there. Anyone can finish it; funds go to you.

   1. Open the bridge page and connect the wallet that made the withdrawal.
   2. Find the withdrawal in your history and press Prove.
   3. Wait out the challenge period (the page shows the time left).
   4. Press Finalize. You pay the network gas fee. The funds go to your address.

   Official bridges for the chains your positions are on:

   • opBNB Bridge (opens in a new tab)

   opBNB bridge (opens in a new tab)Official docs (opens in a new tab)

3. Funds on shut-down Swellchain

   Swellchain, Swell

   $13 · 1 position

   Swell closed Swellchain: the final withdrawal deadline was 2026-06-15 and the chain was to run until 2026-06-30. Withdrawals started before 15 June can still be finalized on Ethereum.

   1. If your withdrawal was started before 15 June: after the 7-day proof wait, prove it on the Ethereum OptimismPortal2 0x758E0EE66102816F5C3Ec9ECc1188860fbb87812 (proveWithdrawalTransaction).
   2. Then call finalizeWithdrawalTransaction on the same contract. You pay ETH gas.
   3. If you never started one: Swell said contract withdrawals were possible until 30 June but are technical. Ask Swell support.

   Official bridges for the chains your positions are on:

   • Swell Superbridge UI (listed by Swellchain docs) (opens in a new tab)

   Official docs (opens in a new tab)

4. Funds in old Ethereum contracts (2015-2021)

   $6 · 1 position

   You have a balance in an old Ethereum contract (The DAO, EtherDelta, IDEX, the 2017 ENS registrar, DigixDAO and others). Each contract has its own withdraw call. Use the wallet that owns the position.

   1. The DAO: on the DAO token 0xbb9bc244d798123fde783fcc1c72d3bb8c189413 call approve(0xbf4ed7b27f1d666546e30d74d50d173d20bca754, yourBalance). Then call withdraw() on the WithdrawDAO contract 0xbf4ed7b27f1d666546e30d74d50d173d20bca754. It pays 1 ETH per 100 DAO.
   2. EtherDelta 0x8d12a197cb00d4747a1fe03395095ce2a5cc6819: from the wallet that deposited, call withdraw(amount) for ETH or withdrawToken(token, amount) for a token. Amounts are in the token's smallest unit.
   3. IDEX v1 0x2a0c0dbecc7e4d658f48e01e3fa353f44050c208: call withdraw(token, amount). Use token 0x0000000000000000000000000000000000000000 for ETH. It reverts if your last IDEX activity was fewer than 240 blocks ago.
   4. 2017 ENS registrar 0x6090a6e47849629b7245dfa1ca21d94cd15878ef: call releaseDeed(labelhash) for the name. The labelhash is keccak256 of the name without .eth. The deposit goes back to the deed owner.
   5. Other contracts (DigixDAO, Neufund and more): use the contract's own withdraw or refund function on Etherscan from the owner wallet. Check the contract's code first.

   WithdrawDAO contract (The DAO) (opens in a new tab)Official docs (opens in a new tab)

5. Funds in frozen StarkEx apps

   Sorare, Immutable X, ApeX Pro, edgeX v1, Myria

   $5 · 1 positionMay not work

   Some StarkEx apps keep balances off-chain. A pending withdrawal can be claimed now. A deposit-only record cannot: the app operator must first publish data.

   1. Check the row type. A pending withdrawal can be claimed now; a deposit ledger row cannot.
   2. For a pending withdrawal, call withdraw with your owner key and asset type on the app's StarkEx contract (Etherscan). Funds go to your registered address.
   3. For a frozen app, the escape hatch needs the operator or data committee to publish state first. See the StarkWare docs.

   Official docs (opens in a new tab)

6. PoolTogether deposit still in pool

   $4 · 1 position

   You deposited into a PoolTogether v3 or v4 prize pool and never withdrew. Your deposit is still in the pool contract.

   1. Open the prize pool contract (prize_pool address) on the block explorer.
   2. v4: call withdrawFrom(from, amount) with your address. v3: call withdrawInstantlyFrom(from, amount, controlledToken, maximumExitFee).
   3. v3 can charge an early-exit fee. Confirm and check your wallet.

   Official docs (opens in a new tab)

7. Expired veCRV lock

   Curve

   $2 · 1 position

   Your veCRV lock ended but the CRV was never withdrawn. It is still locked in the contract until you call withdraw.

   1. Open the veCRV VotingEscrow contract on Etherscan, Write Contract.
   2. Connect the owner wallet and call withdraw().
   3. If the owner is a smart contract that cannot make this call, the CRV stays locked.

   veCRV contract (opens in a new tab)

8. Balancer v2 pool share

   $1 · 2 positions

   You hold Balancer v2 pool tokens, in your wallet or staked. You can exit the pool. Balancer has proposed a wind-down: if it passes, pools become withdraw-only on 30 Oct 2026.

   1. Open the Balancer app, find your pool and use Remove liquidity. Do this before 30 Oct 2026.
   2. If the app does not work, call exitPool on the Balancer v2 Vault 0xBA12222222228d8Ba445958a75a0704d566BF2C8 (Etherscan, Write tab).
   3. If your tokens are staked in Aura, Beefy or a gauge, unstake there first.

   Balancer app (opens in a new tab)Official docs (opens in a new tab)

9. Polygon zkEVM balance

   $1 · 3 positions

   Polygon zkEVM's sequencer stopped on 1 July 2026. Wallet-held funds not bridged before then can be claimed on Ethereum in a claim UI. Polygon treats unclaimed assets as abandoned after 2027-12-31.

   1. Open the Polygon zkEVM claims site and connect the wallet that held the funds.
   2. Pick your balances and send the claim transaction on Ethereum.
   3. Funds locked inside DeFi contracts are not auto-migrated. Ask Polygon through the forum post.

   Official bridges for the chains your positions are on:

   • Agglayer bridge UI (opens in a new tab)

   zkEVM claims site (opens in a new tab)Official docs (opens in a new tab)

10. Lisk L2 balance (closing)

    <$1 · 1 position

    Lisk's own chain closes on 2026-10-31. Lisk says withdrawing to Ethereum takes about 8 days, and unstaking LSK adds 3 days. Start now.

    1. Open the Lisk bridge (type bridge.lisk.com yourself) and connect your wallet.
    2. Withdraw your assets to Ethereum. If you staked LSK, unlock it first and wait 3 days.
    3. After the wait, prove and finalize the withdrawal on Ethereum. You pay gas on both chains.

    Official bridges for the chains your positions are on:

    • Lisk Bridge (opens in a new tab)

    Lisk bridge (opens in a new tab)Official docs (opens in a new tab)

11. Expired veBAL lock

    Balancer

    <$1 · 1 position

    Your veBAL lock ended but you never withdrew. You get 80BAL-20WETH pool tokens back, not BAL.

    1. Open the veBAL contract on Etherscan and go to Write Contract.
    2. Connect the owner wallet and call withdraw().
    3. Then exit the Balancer 80/20 pool to get BAL and WETH.

    veBAL contract (opens in a new tab)Official docs (opens in a new tab)

12. Ended Sablier stream not withdrawn

    <$1 · 1 position

    A Sablier payment stream to you has ended or was canceled, and the tokens in it were never withdrawn. The tokens are still in the Sablier contract.

    1. Open the Sablier app and connect the wallet that owns the stream.
    2. Find the ended stream and press Withdraw.
    3. The tokens go to the stream recipient. Pay the gas fee.

    Sablier app (opens in a new tab)Official docs (opens in a new tab)

13. GMX v1 GLP staked

    <$1 · 1 positionMay not work

    You hold staked GLP, the liquidity token of GMX v1 (Arbitrum or Avalanche). GMX stopped v1 trading in July 2025; you can only sell existing GLP back for the underlying assets.

    1. Open v1.app.gmx.io, connect your wallet and use the Sell GLP page. If your GLP is staked, the page unstakes it as part of the sale.
    2. If the page fails, call unstakeAndRedeemGlp(tokenOut, glpAmount, minOut, receiver) on RewardRouterV2: Arbitrum 0xB95DB5B167D75e6d04227CfFFA61069348d271F5.
    3. GMX docs also mention claims for GLP holders in their distributions section. Rows marked as contracts (vesters, vaults) are unclear.

    GMX v1 app (opens in a new tab)Official docs (opens in a new tab)

14. zkSync Lite balance not claimed

    <$1 · 4 positions

    zkSync Lite was shut down on 2026-05-04. Remaining balances are claimable on Ethereum through a claim contract and a withdrawal portal. Your account is on that list and has not claimed.

    1. Open the zkSync Lite withdrawal portal and connect the wallet that owned the account.
    2. The portal finds your address in the final state, builds the proof and sends the claim. Follow its prompts.
    3. Confirm the Ethereum transaction. Tokens go to your L1 address. Matter Labs sponsors gas for the first 100,000 withdrawals.

    zkSync Lite withdrawal portal (opens in a new tab)Official docs (opens in a new tab)

15. ETH in Blur Pool

    <$1 · 1 position

    You deposited ETH into the Blur Pool to bid on NFTs and never took it out. 1 pool token equals 1 ETH and you can withdraw at any time.

    1. Open the Blur Pool contract on Etherscan and go to Write as Proxy or Write Contract.
    2. Connect the wallet that holds the balance.
    3. Call withdraw with the amount in wei (18 decimals), then confirm.

    Blur Pool contract (opens in a new tab)Official docs (opens in a new tab)

16. Curve fees not claimed (3CRV)

    <$1 · 1 position

    You locked CRV in veCRV and earned fee rewards in 3CRV from the old Curve fee distributor, but never claimed them. They are still in the contract.

    1. Open the contract's Write tab on the block explorer and connect your wallet.
    2. Call claim with your address. Anyone can call it; the tokens go to you.
    3. If many weeks are unclaimed, repeat the call; each call covers up to 20 weeks.
    4. Check your wallet for the 3CRV.

    Fee distributor on Etherscan (opens in a new tab)

17. Hyphen bridge funds stuck

    Biconomy Hyphen

    <$1 · 2 positions

    Hyphen (Biconomy) is no longer supported. Liquidity provider positions may still be withdrawn from the contracts. Transfers that never arrived need the Biconomy team. We could not confirm this from official docs.

    1. If you provided liquidity, call removeLiquidity with your NFT id on the chain's LiquidityProviders contract on Etherscan (Write tab).
    2. For a farming NFT, first call withdraw(nftId, to) on the LiquidityFarming contract.
    3. If you sent a transfer that never arrived, contact Biconomy; only their executors can release it.

18. Ended Sablier stream (no price)

    $0 · 1 position

    An ended or canceled Sablier stream whose token has no known price. Most are airdrop vesting or spam tokens, so the value is unknown and may be zero.

    1. Open the Sablier app and connect the wallet that owns the stream.
    2. Press Withdraw on the ended stream if you want the tokens.
    3. Be careful with unknown tokens: many are spam.

    Sablier app (opens in a new tab)Official docs (opens in a new tab)