Use only the official links below. No real recovery asks for your seed phrase or private key. If anyone offers to recover funds for you, it is a scam.

1. Unclaimed Arbitrum withdrawal

   Arbitrum One, Arbitrum Nova

   $136 · 2 positions

   You withdrew ETH or tokens from Arbitrum to Ethereum but never did the final claim on Ethereum. The challenge period (about 6.4 days) is long over, so the funds can be claimed now.

   1. Open the Arbitrum bridge and connect the receiving wallet.
   2. Open Transactions and find the withdrawal marked Claim, or paste the withdrawal transaction hash.
   3. Press Claim and confirm. You pay the Ethereum gas fee. The funds go to the recipient.

   Official bridges for the chains your positions are on:

   • Arbitrum Bridge (opens in a new tab)

   Arbitrum bridge (opens in a new tab)Official docs (opens in a new tab)

2. dYdX v3 balance

   $13 · 1 position

   dYdX v3 was shut down and its exchange was set to 'frozen' on Ethereum. Your USDC can still be taken out through the escape hatch, or withdrawn if already released.

   1. Open dYdX's v3 sunset post and use the Escape Hatch link in its last update. It is hosted by an independent third party.
   2. Escape needs a proof for your stark key and position. The page builds it; the escape call goes to StarkPerpetual 0xD54f502e184B6B739d7D27a6410a67dc462D69c8.
   3. Then call withdraw from your registered Ethereum address to receive the USDC. You pay Ethereum gas.

   dYdX StarkPerpetual contract (opens in a new tab)Official docs (opens in a new tab)

3. Lisk L2 balance (closing)

   $12 · 1 position

   Lisk's own chain closes on 2026-10-31. Lisk says withdrawing to Ethereum takes about 8 days, and unstaking LSK adds 3 days. Start now.

   1. Open the Lisk bridge (type bridge.lisk.com yourself) and connect your wallet.
   2. Withdraw your assets to Ethereum. If you staked LSK, unlock it first and wait 3 days.
   3. After the wait, prove and finalize the withdrawal on Ethereum. You pay gas on both chains.

   Official bridges for the chains your positions are on:

   • Lisk Bridge (opens in a new tab)

   Lisk bridge (opens in a new tab)Official docs (opens in a new tab)

4. Archived L2 bridge funds

   Archived L2s

   $5 · 2 positionsMay not work

   This chain shut down and its state is gone, so no one can prove a withdrawal now. The Ethereum bridge still holds the money; only the chain team can release it.

   1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
   2. Check that chain's official site for a refund or recovery notice.
   3. Without the chain's final state nobody can prove a withdrawal. Only the chain team can release the bridge funds.

5. friend.tech keys still held

   $4 · 2 positions

   You hold friend.tech keys on Base. The contract still lets you sell them back for ETH, even if the app does not work.

   1. Open the contract's Write tab on Basescan, connect your wallet, and call sellShares(sharesSubject, amount) from the holder wallet.
   2. Use the key owner's address as sharesSubject. The last key of a subject can never be sold.
   3. The ETH arrives in your wallet, minus the sell fees.

   friend.tech contract on Basescan (opens in a new tab)

6. Splits or Zora rewards not withdrawn

   0xSplits, Zora

   $2 · 2 positions

   Money was sent to you through 0xSplits, or you earned Zora creator or referral rewards, and it is still inside the contract waiting for you to withdraw.

   1. Splits: open SplitMain 0x2ed6c4B5dA6378c7897AC67Ba9e43102Feb694EE on Etherscan and call withdraw(account, withdrawETH, tokens[]) with your address. Anyone can call it.
   2. Zora: call withdraw(to, amount) on ProtocolRewards 0x7777777F279eba3d3Ad8F4E708545291A6fDBA8B (same address on Base and other Zora chains), from the account that earned the rewards.
   3. The Splits app (app.splits.org) can also help.

   Splits app (opens in a new tab)

7. Thruster v3 position on Blast

   <$1 · 1 position

   You hold a Thruster v3 liquidity position (an NFT) on Blast. Thruster has shut down, but the position contract still works.

   1. Open the position contract 0x434575EaEa081b735C985FA9bf63CD7b87e227F9 on Blastscan, Write tab, and connect the wallet that owns the NFT.
   2. Call decreaseLiquidity with your tokenId, the liquidity amount, amount0Min, amount1Min and a deadline. Thruster's old guide explains each field.
   3. Then call collect(tokenId, recipient, max, max) to receive the tokens. You can call burn(tokenId) afterwards to delete the empty NFT.
   4. If the NFT is not in your wallet, it may be locked in another contract such as Hyperlock. Withdraw it from there first.

   Thruster position manager (opens in a new tab)

8. Polygon zkEVM balance

   <$1 · 3 positions

   Polygon zkEVM's sequencer stopped on 1 July 2026. Wallet-held funds not bridged before then can be claimed on Ethereum in a claim UI. Polygon treats unclaimed assets as abandoned after 2027-12-31.

   1. Open the Polygon zkEVM claims site and connect the wallet that held the funds.
   2. Pick your balances and send the claim transaction on Ethereum.
   3. Funds locked inside DeFi contracts are not auto-migrated. Ask Polygon through the forum post.

   Official bridges for the chains your positions are on:

   • Agglayer bridge UI (opens in a new tab)

   zkEVM claims site (opens in a new tab)Official docs (opens in a new tab)

9. Expired Pendle position

   <$1 · 1 position

   You hold Pendle PT or LP tokens from a market that has expired. They can be redeemed for the underlying asset at any time.

   1. Open the Pendle app, connect your wallet, and go to Portfolio.
   2. Find the expired position and press Redeem (for PT) or Remove liquidity (for LP).
   3. For LP, redeem the PT you receive afterwards. Confirm and pay gas.

   Pendle app (opens in a new tab)Official docs (opens in a new tab)

10. Orbit Lending deposit on Blast

    <$1 · 1 position

    You supplied funds to Orbit Lending on Blast, which was exploited. You can still withdraw, but some markets hold less cash than is owed, so first come, first served.

    1. Open your cToken contract (listed in the row) on Blast's block explorer, Write tab, connect wallet.
    2. Call redeem(cTokenBalance) or redeemUnderlying(amount).
    3. If you have a borrow in the same market, repay it first; your collateral is locked until then.

    Compound v2 docs (same contract code) (opens in a new tab)

11. zkSync Lite balance not claimed

    <$1 · 1 position

    zkSync Lite was shut down on 2026-05-04. Remaining balances are claimable on Ethereum through a claim contract and a withdrawal portal. Your account is on that list and has not claimed.

    1. Open the zkSync Lite withdrawal portal and connect the wallet that owned the account.
    2. The portal finds your address in the final state, builds the proof and sends the claim. Follow its prompts.
    3. Confirm the Ethereum transaction. Tokens go to your L1 address. Matter Labs sponsors gas for the first 100,000 withdrawals.

    zkSync Lite withdrawal portal (opens in a new tab)Official docs (opens in a new tab)

12. Funds in old Ethereum contracts (2015-2021)

    <$1 · 1 position

    You have a balance in an old Ethereum contract (The DAO, EtherDelta, IDEX, the 2017 ENS registrar, DigixDAO and others). Each contract has its own withdraw call. Use the wallet that owns the position.

    1. The DAO: on the DAO token 0xbb9bc244d798123fde783fcc1c72d3bb8c189413 call approve(0xbf4ed7b27f1d666546e30d74d50d173d20bca754, yourBalance). Then call withdraw() on the WithdrawDAO contract 0xbf4ed7b27f1d666546e30d74d50d173d20bca754. It pays 1 ETH per 100 DAO.
    2. EtherDelta 0x8d12a197cb00d4747a1fe03395095ce2a5cc6819: from the wallet that deposited, call withdraw(amount) for ETH or withdrawToken(token, amount) for a token. Amounts are in the token's smallest unit.
    3. IDEX v1 0x2a0c0dbecc7e4d658f48e01e3fa353f44050c208: call withdraw(token, amount). Use token 0x0000000000000000000000000000000000000000 for ETH. It reverts if your last IDEX activity was fewer than 240 blocks ago.
    4. 2017 ENS registrar 0x6090a6e47849629b7245dfa1ca21d94cd15878ef: call releaseDeed(labelhash) for the name. The labelhash is keccak256 of the name without .eth. The deposit goes back to the deed owner.
    5. Other contracts (DigixDAO, Neufund and more): use the contract's own withdraw or refund function on Etherscan from the owner wallet. Check the contract's code first.

    WithdrawDAO contract (The DAO) (opens in a new tab)Official docs (opens in a new tab)