Use only the official links below. No real recovery asks for your seed phrase or private key. If anyone offers to recover funds for you, it is a scam.

1. Expired Pendle position

   $3,976 · 4 positionsYou can claim$3,973May not work$3

   You hold Pendle PT or LP tokens from a market that has expired. They can be redeemed for the underlying asset at any time.

   1. Open the Pendle app, connect your wallet, and go to Portfolio.
   2. Find the expired position and press Redeem (for PT) or Remove liquidity (for LP).
   3. For LP, redeem the PT you receive afterwards. Confirm and pay gas.

   Pendle app (opens in a new tab)Official docs (opens in a new tab)

2. Unclaimed OP Stack chain withdrawal

   Blast, Mantle, Mode, Zora, Lisk, Ink, Unichain and other OP chains

   $471 · 2 positions

   You withdrew from an OP Stack chain to Ethereum but never completed the last step. The funds wait in that chain's bridge.

   1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
   2. Connect the receiving wallet and open your transactions. Press Prove, wait out the challenge period shown on the page, then press Finalize.
   3. Pay the Ethereum gas fee each time.

   Official bridges for the chains your positions are on:

   • Blast bridge (opens in a new tab)

   Official docs (opens in a new tab)

3. Unfinished zkSync withdrawal

   zkSync Era

   $399 · 1 position

   You started a withdrawal from zkSync Era (or a similar ZK Stack chain) to Ethereum, but never finalized it on Ethereum. The money sits in the L1 bridge.

   1. Open the ZKsync bridge and connect your wallet.
   2. Find the withdrawal that is ready to finalize. Withdrawals are delayed about 3 hours after they are sent.
   3. Press Finalize and pay the Ethereum gas fee. The funds go to the receiver address.

   Official bridges for the chains your positions are on:

   • ZKsync Portal bridge (opens in a new tab)

   zkSync Bridge (opens in a new tab)Official docs (opens in a new tab)

4. IntentX trading collateral

   $217 · 2 positionsYou can claim$110May not work$107

   You have collateral in an IntentX trading sub-account. Free collateral can be withdrawn; locked collateral needs more steps. intentx.io loads, but we could not read any withdrawal guide on it.

   1. Check intentx.io first. If it does not work, call withdrawFromAccount(subAccount, amount) on the IntentX MultiAccount contract for the free amount.
   2. Locked collateral must be deallocated first, which needs a signed proof from the Symmio oracle.
   3. Open positions must be closed or force-closed first. A developer may be needed.

   IntentX site (may not work) (opens in a new tab)

5. Thruster v3 position on Blast

   $180 · 4 positions

   You hold a Thruster v3 liquidity position (an NFT) on Blast. Thruster has shut down, but the position contract still works.

   1. Open the position contract 0x434575EaEa081b735C985FA9bf63CD7b87e227F9 on Blastscan, Write tab, and connect the wallet that owns the NFT.
   2. Call decreaseLiquidity with your tokenId, the liquidity amount, amount0Min, amount1Min and a deadline. Thruster's old guide explains each field.
   3. Then call collect(tokenId, recipient, max, max) to receive the tokens. You can call burn(tokenId) afterwards to delete the empty NFT.
   4. If the NFT is not in your wallet, it may be locked in another contract such as Hyperlock. Withdraw it from there first.

   Thruster position manager (opens in a new tab)

6. Ionic Protocol deposit

   $128 · 1 positionMay not work

   Ionic Protocol lending is shut down and ionic.money is now a domain for sale. Your deposit receipt (ionToken) may still be redeemable, only for the cash left, first come first served.

   1. Open the ionToken contract for your market and chain in the block explorer. Find the pool list with PoolDirectory.getAllPools().
   2. If you have an open loan, repay it first.
   3. Connect your wallet and call redeem or redeemUnderlying. You get at most the cash left in the market.

   Official docs (opens in a new tab)

7. USDC burned but not minted

   Circle CCTP

   $50 · 4 positions

   USDC was burned on one chain through Circle CCTP but the matching USDC was never minted on the destination chain. Circle can still sign it, so it can be completed.

   1. Find the burn transaction hash on the source chain.
   2. Get the signed attestation for it from Circle's attestation API (see the Circle CCTP docs).
   3. On the destination chain, call receiveMessage(message, attestation) on the MessageTransmitter contract. You pay the gas fee. USDC goes to the recipient.

   Circle CCTP docs (opens in a new tab)Official docs (opens in a new tab)

8. Nucleus vault shares

   Nucleus (BoringVault)

   $27 · 3 positions

   Nucleus deprecated its vaults on 19 Dec 2025 and the withdraw page is gone. You can redeem vault shares through the Teller contract, but only for assets the vault still holds.

   1. Read the Nucleus deprecation guide first.
   2. Check which tokens the vault still holds, and your vault token balance, on Etherscan (or the Plume explorer).
   3. On the vault's Teller contract, Write tab, call bulkWithdraw(withdrawAsset, shareAmount, minimumAssets, to). The guide says to use 0 for minimumAssets.

   Nucleus deprecation guide (opens in a new tab)Official docs (opens in a new tab)

9. Polygon zkEVM balance

   $26 · 3 positions

   Polygon zkEVM's sequencer stopped on 1 July 2026. Wallet-held funds not bridged before then can be claimed on Ethereum in a claim UI. Polygon treats unclaimed assets as abandoned after 2027-12-31.

   1. Open the Polygon zkEVM claims site and connect the wallet that held the funds.
   2. Pick your balances and send the claim transaction on Ethereum.
   3. Funds locked inside DeFi contracts are not auto-migrated. Ask Polygon through the forum post.

   Official bridges for the chains your positions are on:

   • Agglayer bridge UI (opens in a new tab)

   zkEVM claims site (opens in a new tab)Official docs (opens in a new tab)

10. Seamless v1 deposit on Base

    $11 · 2 positions

    You supplied funds to the Seamless v1 lending pool on Base (an Aave v3 fork). seamlessprotocol.com now redirects to X, but the pool contract still lets you withdraw.

    1. Open the pool contract 0x8F44Fd754285aa6A2b8B9B97739B79746e0475a7 on Basescan, Write tab, connect wallet.
    2. Call withdraw(asset, amount, to) with the token address, amount = max (type(uint256).max) and your wallet.
    3. If you have debt, repay() first or withdraw only the free part.

    Seamless v1 pool on Basescan (opens in a new tab)Official docs (opens in a new tab)

11. Balancer v2 pool share

    $9 · 1 position

    You hold Balancer v2 pool tokens, in your wallet or staked. You can exit the pool. Balancer has proposed a wind-down: if it passes, pools become withdraw-only on 30 Oct 2026.

    1. Open the Balancer app, find your pool and use Remove liquidity. Do this before 30 Oct 2026.
    2. If the app does not work, call exitPool on the Balancer v2 Vault 0xBA12222222228d8Ba445958a75a0704d566BF2C8 (Etherscan, Write tab).
    3. If your tokens are staked in Aura, Beefy or a gauge, unstake there first.

    Balancer app (opens in a new tab)Official docs (opens in a new tab)

12. Lisk L2 balance (closing)

    $8 · 4 positions

    Lisk's own chain closes on 2026-10-31. Lisk says withdrawing to Ethereum takes about 8 days, and unstaking LSK adds 3 days. Start now.

    1. Open the Lisk bridge (type bridge.lisk.com yourself) and connect your wallet.
    2. Withdraw your assets to Ethereum. If you staked LSK, unlock it first and wait 3 days.
    3. After the wait, prove and finalize the withdrawal on Ethereum. You pay gas on both chains.

    Official bridges for the chains your positions are on:

    • Lisk Bridge (opens in a new tab)

    Lisk bridge (opens in a new tab)Official docs (opens in a new tab)

13. MKR never converted to SKY

    Maker / Sky

    $5 · 1 position

    You hold MKR, or MKR in the old DSChief voting contract, that was never converted to SKY. The converter still works. Its fee is 5% now (read on-chain 2026-10-01) and rises 1 point every 3 months.

    1. Open the Sky app and connect your wallet.
    2. If your MKR is in the old DSChief voting contract, first call free(amount) on that contract.
    3. Approve MKR, then convert it to SKY. You get 24,000 SKY per MKR minus the fee.
    4. Without the app: call mkrToSky(usr, mkrAmt) on the converter 0xA1Ea1bA18E88C381C724a75F23a130420C403f9a.

    Sky app (opens in a new tab)Official docs (opens in a new tab)

14. GMX v1 GLP staked

    $3 · 2 positions

    You hold staked GLP, the liquidity token of GMX v1 (Arbitrum or Avalanche). GMX stopped v1 trading in July 2025; you can only sell existing GLP back for the underlying assets.

    1. Open v1.app.gmx.io, connect your wallet and use the Sell GLP page. If your GLP is staked, the page unstakes it as part of the sale.
    2. If the page fails, call unstakeAndRedeemGlp(tokenOut, glpAmount, minOut, receiver) on RewardRouterV2: Arbitrum 0xB95DB5B167D75e6d04227CfFFA61069348d271F5.
    3. GMX docs also mention claims for GLP holders in their distributions section. Rows marked as contracts (vesters, vaults) are unclear.

    GMX v1 app (opens in a new tab)Official docs (opens in a new tab)

15. zkSync Lite balance not claimed

    <$1 · 1 position

    zkSync Lite was shut down on 2026-05-04. Remaining balances are claimable on Ethereum through a claim contract and a withdrawal portal. Your account is on that list and has not claimed.

    1. Open the zkSync Lite withdrawal portal and connect the wallet that owned the account.
    2. The portal finds your address in the final state, builds the proof and sends the claim. Follow its prompts.
    3. Confirm the Ethereum transaction. Tokens go to your L1 address. Matter Labs sponsors gas for the first 100,000 withdrawals.

    zkSync Lite withdrawal portal (opens in a new tab)Official docs (opens in a new tab)

16. Across deposit never filled

    $0 · 1 positionMay not work

    You sent a deposit through Across but nobody filled it on the other chain. Expired deposits are refunded by Across in batches. If no refund arrived long after expiry, contact Across support.

    1. Find your deposit transaction hash on the origin chain explorer.
    2. Look up the hash in the Across Deposit Status Tracker (linked in the Across docs). Status 'expired' means the refund is queued.
    3. Refunds go through batches that take several hours. If nothing arrives long after expiry, send the hash to Across support.
    4. No refund address was set? The refund goes to the depositor address.

    Across (opens in a new tab)Official docs (opens in a new tab)