Use only the official links below. No real recovery asks for your seed phrase or private key. If anyone offers to recover funds for you, it is a scam.

1. dYdX v3 balance

   $102 · 1 position

   dYdX v3 was shut down and its exchange was set to 'frozen' on Ethereum. Your USDC can still be taken out through the escape hatch, or withdrawn if already released.

   1. Open dYdX's v3 sunset post and use the Escape Hatch link in its last update. It is hosted by an independent third party.
   2. Escape needs a proof for your stark key and position. The page builds it; the escape call goes to StarkPerpetual 0xD54f502e184B6B739d7D27a6410a67dc462D69c8.
   3. Then call withdraw from your registered Ethereum address to receive the USDC. You pay Ethereum gas.

   dYdX StarkPerpetual contract (opens in a new tab)Official docs (opens in a new tab)

2. Unclaimed OP Stack chain withdrawal

   Blast, Mantle, Mode, Zora, Lisk, Ink, Unichain and other OP chains

   $54 · 1 position

   You withdrew from an OP Stack chain to Ethereum but never completed the last step. The funds wait in that chain's bridge.

   1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
   2. Connect the receiving wallet and open your transactions. Press Prove, wait out the challenge period shown on the page, then press Finalize.
   3. Pay the Ethereum gas fee each time.

   Official docs (opens in a new tab)

3. Archived L2 bridge funds

   Archived L2s

   $52 · 2 positionsMay not work

   This chain shut down and its state is gone, so no one can prove a withdrawal now. The Ethereum bridge still holds the money; only the chain team can release it.

   1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
   2. Check that chain's official site for a refund or recovery notice.
   3. Without the chain's final state nobody can prove a withdrawal. Only the chain team can release the bridge funds.

   Official bridges for the chains your positions are on:

   • Redstone balance claim (opens in a new tab)

4. Expired Pendle position

   $46 · 6 positions

   You hold Pendle PT or LP tokens from a market that has expired. They can be redeemed for the underlying asset at any time.

   1. Open the Pendle app, connect your wallet, and go to Portfolio.
   2. Find the expired position and press Redeem (for PT) or Remove liquidity (for LP).
   3. For LP, redeem the PT you receive afterwards. Confirm and pay gas.

   Pendle app (opens in a new tab)Official docs (opens in a new tab)

5. EigenLayer withdrawal not completed

   $29 · 1 position

   You queued a withdrawal from EigenLayer and the waiting time has passed, but you never completed it. Only the withdrawer address can complete it.

   1. Open the EigenLayer app and connect the withdrawer wallet.
   2. Find your queued withdrawal and press Complete.
   3. Choose to receive the tokens (not re-deposit). Confirm and pay gas in ETH.

   EigenLayer app (opens in a new tab)

6. zkSync Lite balance not claimed

   $26 · 4 positions

   zkSync Lite was shut down on 2026-05-04. Remaining balances are claimable on Ethereum through a claim contract and a withdrawal portal. Your account is on that list and has not claimed.

   1. Open the zkSync Lite withdrawal portal and connect the wallet that owned the account.
   2. The portal finds your address in the final state, builds the proof and sends the claim. Follow its prompts.
   3. Confirm the Ethereum transaction. Tokens go to your L1 address. Matter Labs sponsors gas for the first 100,000 withdrawals.

   zkSync Lite withdrawal portal (opens in a new tab)Official docs (opens in a new tab)

7. Curve fees not claimed (3CRV)

   $21 · 1 position

   You locked CRV in veCRV and earned fee rewards in 3CRV from the old Curve fee distributor, but never claimed them. They are still in the contract.

   1. Open the contract's Write tab on the block explorer and connect your wallet.
   2. Call claim with your address. Anyone can call it; the tokens go to you.
   3. If many weeks are unclaimed, repeat the call; each call covers up to 20 weeks.
   4. Check your wallet for the 3CRV.

   Fee distributor on Etherscan (opens in a new tab)

8. ETH in Blur Pool

   $13 · 1 position

   You deposited ETH into the Blur Pool to bid on NFTs and never took it out. 1 pool token equals 1 ETH and you can withdraw at any time.

   1. Open the Blur Pool contract on Etherscan and go to Write as Proxy or Write Contract.
   2. Connect the wallet that holds the balance.
   3. Call withdraw with the amount in wei (18 decimals), then confirm.

   Blur Pool contract (opens in a new tab)Official docs (opens in a new tab)

9. Polygon zkEVM balance

   $10 · 4 positions

   Polygon zkEVM's sequencer stopped on 1 July 2026. Wallet-held funds not bridged before then can be claimed on Ethereum in a claim UI. Polygon treats unclaimed assets as abandoned after 2027-12-31.

   1. Open the Polygon zkEVM claims site and connect the wallet that held the funds.
   2. Pick your balances and send the claim transaction on Ethereum.
   3. Funds locked inside DeFi contracts are not auto-migrated. Ask Polygon through the forum post.

   Official bridges for the chains your positions are on:

   • Agglayer bridge UI (opens in a new tab)

   zkEVM claims site (opens in a new tab)Official docs (opens in a new tab)

10. Ionic Protocol deposit

    $6 · 1 positionMay not work

    Ionic Protocol lending is shut down and ionic.money is now a domain for sale. Your deposit receipt (ionToken) may still be redeemable, only for the cash left, first come first served.

    1. Open the ionToken contract for your market and chain in the block explorer. Find the pool list with PoolDirectory.getAllPools().
    2. If you have an open loan, repay it first.
    3. Connect your wallet and call redeem or redeemUnderlying. You get at most the cash left in the market.

    Official docs (opens in a new tab)

11. GMX v1 GLP staked

    $4 · 1 position

    You hold staked GLP, the liquidity token of GMX v1 (Arbitrum or Avalanche). GMX stopped v1 trading in July 2025; you can only sell existing GLP back for the underlying assets.

    1. Open v1.app.gmx.io, connect your wallet and use the Sell GLP page. If your GLP is staked, the page unstakes it as part of the sale.
    2. If the page fails, call unstakeAndRedeemGlp(tokenOut, glpAmount, minOut, receiver) on RewardRouterV2: Arbitrum 0xB95DB5B167D75e6d04227CfFFA61069348d271F5.
    3. GMX docs also mention claims for GLP holders in their distributions section. Rows marked as contracts (vesters, vaults) are unclear.

    GMX v1 app (opens in a new tab)Official docs (opens in a new tab)

12. Harmony balance (chain halted)

    $4 · 4 positionsNeeds the team

    Harmony proposed (non-binding, 7 Sept 2026) a final snapshot and an ERC-20 ONE airdrop on Ethereum. This list shows positions at the last block our data saw. You cannot sign anything on the chain now.

    1. Do not expect to withdraw this yourself. The chain is halted.
    2. Watch Harmony's official channels for the vote result and the snapshot rules.
    3. Keep access to your wallet. The proposal says the airdrop would go to the same address on Ethereum.

13. Lisk L2 balance (closing)

    $3 · 1 position

    Lisk's own chain closes on 2026-10-31. Lisk says withdrawing to Ethereum takes about 8 days, and unstaking LSK adds 3 days. Start now.

    1. Open the Lisk bridge (type bridge.lisk.com yourself) and connect your wallet.
    2. Withdraw your assets to Ethereum. If you staked LSK, unlock it first and wait 3 days.
    3. After the wait, prove and finalize the withdrawal on Ethereum. You pay gas on both chains.

    Official bridges for the chains your positions are on:

    • Lisk Bridge (opens in a new tab)

    Lisk bridge (opens in a new tab)Official docs (opens in a new tab)

14. K2 (Karak) chain balance

    $3 · 1 positionNeeds the team

    The K2 team's bridge on Ethereum now pays balances by Merkle proof (a list that proves your balance). The merkle root is set and claims are not paused. After 2027-09-12 the guardian can sweep what is left.

    1. Ask the K2 team for your Merkle proof. We could not find an official page that gives proofs.
    2. On the OptimismPortal 0xeeCE9CD7Abd1CC84d9dfc7493e7e68079E47eA73 call claimETH(_amount, _proof) for ETH.
    3. For tokens, call claimTokens(_tokens, _amounts, _proof) on the L1StandardBridge 0xBA61F25dd9f2d5f02D01B1C2c1c5F0B14c4B48A3.

    K2 OptimismPortal on Etherscan (opens in a new tab)

15. Seamless v1 deposit on Base

    $2 · 1 position

    You supplied funds to the Seamless v1 lending pool on Base (an Aave v3 fork). seamlessprotocol.com now redirects to X, but the pool contract still lets you withdraw.

    1. Open the pool contract 0x8F44Fd754285aa6A2b8B9B97739B79746e0475a7 on Basescan, Write tab, connect wallet.
    2. Call withdraw(asset, amount, to) with the token address, amount = max (type(uint256).max) and your wallet.
    3. If you have debt, repay() first or withdraw only the free part.

    Seamless v1 pool on Basescan (opens in a new tab)Official docs (opens in a new tab)

16. friend.tech keys still held

    $2 · 2 positions

    You hold friend.tech keys on Base. The contract still lets you sell them back for ETH, even if the app does not work.

    1. Open the contract's Write tab on Basescan, connect your wallet, and call sellShares(sharesSubject, amount) from the holder wallet.
    2. Use the key owner's address as sharesSubject. The last key of a subject can never be sold.
    3. The ETH arrives in your wallet, minus the sell fees.

    friend.tech contract on Basescan (opens in a new tab)

17. Balancer v2 pool share

    $2 · 1 position

    You hold Balancer v2 pool tokens, in your wallet or staked. You can exit the pool. Balancer has proposed a wind-down: if it passes, pools become withdraw-only on 30 Oct 2026.

    1. Open the Balancer app, find your pool and use Remove liquidity. Do this before 30 Oct 2026.
    2. If the app does not work, call exitPool on the Balancer v2 Vault 0xBA12222222228d8Ba445958a75a0704d566BF2C8 (Etherscan, Write tab).
    3. If your tokens are staked in Aura, Beefy or a gauge, unstake there first.

    Balancer app (opens in a new tab)Official docs (opens in a new tab)

18. Splits or Zora rewards not withdrawn

    0xSplits, Zora

    <$1 · 1 position

    Money was sent to you through 0xSplits, or you earned Zora creator or referral rewards, and it is still inside the contract waiting for you to withdraw.

    1. Splits: open SplitMain 0x2ed6c4B5dA6378c7897AC67Ba9e43102Feb694EE on Etherscan and call withdraw(account, withdrawETH, tokens[]) with your address. Anyone can call it.
    2. Zora: call withdraw(to, amount) on ProtocolRewards 0x7777777F279eba3d3Ad8F4E708545291A6fDBA8B (same address on Base and other Zora chains), from the account that earned the rewards.
    3. The Splits app (app.splits.org) can also help.

    Splits app (opens in a new tab)

19. Thruster v3 position on Blast

    <$1 · 1 position

    You hold a Thruster v3 liquidity position (an NFT) on Blast. Thruster has shut down, but the position contract still works.

    1. Open the position contract 0x434575EaEa081b735C985FA9bf63CD7b87e227F9 on Blastscan, Write tab, and connect the wallet that owns the NFT.
    2. Call decreaseLiquidity with your tokenId, the liquidity amount, amount0Min, amount1Min and a deadline. Thruster's old guide explains each field.
    3. Then call collect(tokenId, recipient, max, max) to receive the tokens. You can call burn(tokenId) afterwards to delete the empty NFT.
    4. If the NFT is not in your wallet, it may be locked in another contract such as Hyperlock. Withdraw it from there first.

    Thruster position manager (opens in a new tab)

20. Ellipsis LP tokens

    <$1 · 1 position

    You hold Ellipsis stablecoin or BTC pool tokens on BNB Chain, in your wallet or staked. The contracts still work; the Ellipsis site did not load when checked.

    1. If staked, call emergencyWithdraw(pid) on LpTokenStaker 0xcce949De564fE60e7f96C85e55177F8B9E4CF61b; normal withdraw fails.
    2. Then call remove_liquidity or remove_liquidity_one_coin on the pool contract.
    3. Use BscScan's Write Contract tab.

    LpTokenStaker on BscScan (opens in a new tab)