Use only the official links below. No real recovery asks for your seed phrase or private key. If anyone offers to recover funds for you, it is a scam.

1. Unclaimed OP Stack chain withdrawal

   Blast, Mantle, Mode, Zora, Lisk, Ink, Unichain and other OP chains

   $937 · 1 positionMay not work

   You withdrew from an OP Stack chain to Ethereum but never completed the last step. The funds wait in that chain's bridge.

   1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
   2. Connect the receiving wallet and open your transactions. Press Prove, wait out the challenge period shown on the page, then press Finalize.
   3. Pay the Ethereum gas fee each time.

   Official docs (opens in a new tab)

2. Old Mantle v1 withdrawal

   $766 · 1 position

   You withdrew from the old Mantle chain (2023 to March 2024) and the withdrawal never finished on Ethereum. We could not confirm that the current Mantle bridge still finishes pre-upgrade withdrawals.

   1. Open the Mantle bridge and connect the wallet that made the withdrawal.
   2. Find the withdrawal in your history. Current withdrawals need Prove (about 30 minutes), then Claim on Ethereum about 30 minutes later.
   3. If an old withdrawal is not listed, contact Mantle support with the transaction hash.

   Official bridges for the chains your positions are on:

   • Mantle Bridge (opens in a new tab)

   Mantle bridge (opens in a new tab)Official docs (opens in a new tab)

3. dYdX v3 balance

   $751 · 2 positions

   dYdX v3 was shut down and its exchange was set to 'frozen' on Ethereum. Your USDC can still be taken out through the escape hatch, or withdrawn if already released.

   1. Open dYdX's v3 sunset post and use the Escape Hatch link in its last update. It is hosted by an independent third party.
   2. Escape needs a proof for your stark key and position. The page builds it; the escape call goes to StarkPerpetual 0xD54f502e184B6B739d7D27a6410a67dc462D69c8.
   3. Then call withdraw from your registered Ethereum address to receive the USDC. You pay Ethereum gas.

   dYdX StarkPerpetual contract (opens in a new tab)Official docs (opens in a new tab)

4. MKR never converted to SKY

   Maker / Sky

   $447 · 1 position

   You hold MKR, or MKR in the old DSChief voting contract, that was never converted to SKY. The converter still works. Its fee is 5% now (read on-chain 2026-10-01) and rises 1 point every 3 months.

   1. Open the Sky app and connect your wallet.
   2. If your MKR is in the old DSChief voting contract, first call free(amount) on that contract.
   3. Approve MKR, then convert it to SKY. You get 24,000 SKY per MKR minus the fee.
   4. Without the app: call mkrToSky(usr, mkrAmt) on the converter 0xA1Ea1bA18E88C381C724a75F23a130420C403f9a.

   Sky app (opens in a new tab)Official docs (opens in a new tab)

5. K2 (Karak) chain balance

   $133 · 1 positionNeeds the team

   The K2 team's bridge on Ethereum now pays balances by Merkle proof (a list that proves your balance). The merkle root is set and claims are not paused. After 2027-09-12 the guardian can sweep what is left.

   1. Ask the K2 team for your Merkle proof. We could not find an official page that gives proofs.
   2. On the OptimismPortal 0xeeCE9CD7Abd1CC84d9dfc7493e7e68079E47eA73 call claimETH(_amount, _proof) for ETH.
   3. For tokens, call claimTokens(_tokens, _amounts, _proof) on the L1StandardBridge 0xBA61F25dd9f2d5f02D01B1C2c1c5F0B14c4B48A3.

   K2 OptimismPortal on Etherscan (opens in a new tab)

6. Polygon zkEVM balance

   $121 · 4 positions

   Polygon zkEVM's sequencer stopped on 1 July 2026. Wallet-held funds not bridged before then can be claimed on Ethereum in a claim UI. Polygon treats unclaimed assets as abandoned after 2027-12-31.

   1. Open the Polygon zkEVM claims site and connect the wallet that held the funds.
   2. Pick your balances and send the claim transaction on Ethereum.
   3. Funds locked inside DeFi contracts are not auto-migrated. Ask Polygon through the forum post.

   Official bridges for the chains your positions are on:

   • Agglayer bridge UI (opens in a new tab)

   zkEVM claims site (opens in a new tab)Official docs (opens in a new tab)

7. Balancer v2 pool share

   $51 · 9 positions

   You hold Balancer v2 pool tokens, in your wallet or staked. You can exit the pool. Balancer has proposed a wind-down: if it passes, pools become withdraw-only on 30 Oct 2026.

   1. Open the Balancer app, find your pool and use Remove liquidity. Do this before 30 Oct 2026.
   2. If the app does not work, call exitPool on the Balancer v2 Vault 0xBA12222222228d8Ba445958a75a0704d566BF2C8 (Etherscan, Write tab).
   3. If your tokens are staked in Aura, Beefy or a gauge, unstake there first.

   Balancer app (opens in a new tab)Official docs (opens in a new tab)

8. PoolTogether deposit still in pool

   $4 · 1 position

   You deposited into a PoolTogether v3 or v4 prize pool and never withdrew. Your deposit is still in the pool contract.

   1. Open the prize pool contract (prize_pool address) on the block explorer.
   2. v4: call withdrawFrom(from, amount) with your address. v3: call withdrawInstantlyFrom(from, amount, controlledToken, maximumExitFee).
   3. v3 can charge an early-exit fee. Confirm and check your wallet.

   Official docs (opens in a new tab)

9. GMX v1 GLP staked

   $3 · 1 position

   You hold staked GLP, the liquidity token of GMX v1 (Arbitrum or Avalanche). GMX stopped v1 trading in July 2025; you can only sell existing GLP back for the underlying assets.

   1. Open v1.app.gmx.io, connect your wallet and use the Sell GLP page. If your GLP is staked, the page unstakes it as part of the sale.
   2. If the page fails, call unstakeAndRedeemGlp(tokenOut, glpAmount, minOut, receiver) on RewardRouterV2: Arbitrum 0xB95DB5B167D75e6d04227CfFFA61069348d271F5.
   3. GMX docs also mention claims for GLP holders in their distributions section. Rows marked as contracts (vesters, vaults) are unclear.

   GMX v1 app (opens in a new tab)Official docs (opens in a new tab)

10. Alpaca staked ibTokens (FairLaunch)

    Alpaca Finance

    <$1 · 1 position

    You staked Alpaca ibTokens in the old FairLaunch farm on BNB Chain. The app is gone but the contract lets you take them out. The ibUSDC pool (pid 24) may not pay.

    1. Open FairLaunch 0xA625AB01B08ce023B2a342Dbb12a16f2C8489A8F on BscScan, Write Contract.
    2. Call withdrawAll(user, pid) with your address and the pool id, or emergencyWithdraw(pid).
    3. Then call withdraw(shares) on the ibToken vault to get the base token. Contract wallets must send from the contract.

    FairLaunch on BscScan (opens in a new tab)

11. Expired veBAL lock

    Balancer

    <$1 · 1 position

    Your veBAL lock ended but you never withdrew. You get 80BAL-20WETH pool tokens back, not BAL.

    1. Open the veBAL contract on Etherscan and go to Write Contract.
    2. Connect the owner wallet and call withdraw().
    3. Then exit the Balancer 80/20 pool to get BAL and WETH.

    veBAL contract (opens in a new tab)Official docs (opens in a new tab)

12. Alpaca v1 vault tokens

    Alpaca Finance

    <$1 · 1 position

    You hold Alpaca v1 ibTokens (deposit receipts) on BNB Chain. The vault still pays out the underlying token.

    1. Open the ibToken contract (contract column) on BscScan and go to Write Contract.
    2. Connect the owner wallet and call withdraw(shares).
    3. ibBUSD, ibETH, ibBTCB and ibUSDC were migrated: withdraw may pay a different token. If it reverts, read the contract's functions on BscScan.

13. Hyphen bridge funds stuck

    Biconomy Hyphen

    <$1 · 2 positions

    Hyphen (Biconomy) is no longer supported. Liquidity provider positions may still be withdrawn from the contracts. Transfers that never arrived need the Biconomy team. We could not confirm this from official docs.

    1. If you provided liquidity, call removeLiquidity with your NFT id on the chain's LiquidityProviders contract on Etherscan (Write tab).
    2. For a farming NFT, first call withdraw(nftId, to) on the LiquidityFarming contract.
    3. If you sent a transfer that never arrived, contact Biconomy; only their executors can release it.

14. Funds in old Ethereum contracts (2015-2021)

    <$1 · 1 position

    You have a balance in an old Ethereum contract (The DAO, EtherDelta, IDEX, the 2017 ENS registrar, DigixDAO and others). Each contract has its own withdraw call. Use the wallet that owns the position.

    1. The DAO: on the DAO token 0xbb9bc244d798123fde783fcc1c72d3bb8c189413 call approve(0xbf4ed7b27f1d666546e30d74d50d173d20bca754, yourBalance). Then call withdraw() on the WithdrawDAO contract 0xbf4ed7b27f1d666546e30d74d50d173d20bca754. It pays 1 ETH per 100 DAO.
    2. EtherDelta 0x8d12a197cb00d4747a1fe03395095ce2a5cc6819: from the wallet that deposited, call withdraw(amount) for ETH or withdrawToken(token, amount) for a token. Amounts are in the token's smallest unit.
    3. IDEX v1 0x2a0c0dbecc7e4d658f48e01e3fa353f44050c208: call withdraw(token, amount). Use token 0x0000000000000000000000000000000000000000 for ETH. It reverts if your last IDEX activity was fewer than 240 blocks ago.
    4. 2017 ENS registrar 0x6090a6e47849629b7245dfa1ca21d94cd15878ef: call releaseDeed(labelhash) for the name. The labelhash is keccak256 of the name without .eth. The deposit goes back to the deed owner.
    5. Other contracts (DigixDAO, Neufund and more): use the contract's own withdraw or refund function on Etherscan from the owner wallet. Check the contract's code first.

    WithdrawDAO contract (The DAO) (opens in a new tab)Official docs (opens in a new tab)