Use only the official links below. No real recovery asks for your seed phrase or private key. If anyone offers to recover funds for you, it is a scam.

1. Nucleus vault shares

   Nucleus (BoringVault)

   $26,530 · 2 positionsMay not work

   Nucleus deprecated its vaults on 19 Dec 2025 and the withdraw page is gone. You can redeem vault shares through the Teller contract, but only for assets the vault still holds.

   1. Read the Nucleus deprecation guide first.
   2. Check which tokens the vault still holds, and your vault token balance, on Etherscan (or the Plume explorer).
   3. On the vault's Teller contract, Write tab, call bulkWithdraw(withdrawAsset, shareAmount, minimumAssets, to). The guide says to use 0 for minimumAssets.

   Nucleus deprecation guide (opens in a new tab)Official docs (opens in a new tab)

2. ETH in Blur Pool

   $19,966 · 1 position

   You deposited ETH into the Blur Pool to bid on NFTs and never took it out. 1 pool token equals 1 ETH and you can withdraw at any time.

   1. Open the Blur Pool contract on Etherscan and go to Write as Proxy or Write Contract.
   2. Connect the wallet that holds the balance.
   3. Call withdraw with the amount in wei (18 decimals), then confirm.

   Blur Pool contract (opens in a new tab)Official docs (opens in a new tab)

3. Balancer v3 pool share

   $19,077 · 1 position

   You hold Balancer v3 pool tokens, in your wallet or staked. You can exit the pool. Under Balancer's wind-down proposal, the v3 Vault would pause on 30 Nov 2026, so withdraw before then.

   1. Open the Balancer app, find your pool and use Remove liquidity.
   2. If the pool is paused, anyone can call enableRecoveryMode(pool) on the v3 Vault 0xbA1333333333a1BA1108E8412f11850A5C319bA9. Then call removeLiquidityRecovery on the Router.
   3. If your tokens are staked in a gauge, Aura or Beefy, unstake there first.

   Balancer app (opens in a new tab)Official docs (opens in a new tab)

4. Unclaimed OP Stack chain withdrawal

   Blast, Mantle, Mode, Zora, Lisk, Ink, Unichain and other OP chains

   $3,647 · 2 positions

   You withdrew from an OP Stack chain to Ethereum but never completed the last step. The funds wait in that chain's bridge.

   1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
   2. Connect the receiving wallet and open your transactions. Press Prove, wait out the challenge period shown on the page, then press Finalize.
   3. Pay the Ethereum gas fee each time.

   Official bridges for the chains your positions are on:

   • Blast bridge (opens in a new tab)

   Official docs (opens in a new tab)

5. zkSync Lite balance not claimed

   $2,682 · 1 position

   zkSync Lite was shut down on 2026-05-04. Remaining balances are claimable on Ethereum through a claim contract and a withdrawal portal. Your account is on that list and has not claimed.

   1. Open the zkSync Lite withdrawal portal and connect the wallet that owned the account.
   2. The portal finds your address in the final state, builds the proof and sends the claim. Follow its prompts.
   3. Confirm the Ethereum transaction. Tokens go to your L1 address. Matter Labs sponsors gas for the first 100,000 withdrawals.

   zkSync Lite withdrawal portal (opens in a new tab)Official docs (opens in a new tab)

6. Expired Pendle position

   $1,933 · 1 position

   You hold Pendle PT or LP tokens from a market that has expired. They can be redeemed for the underlying asset at any time.

   1. Open the Pendle app, connect your wallet, and go to Portfolio.
   2. Find the expired position and press Redeem (for PT) or Remove liquidity (for LP).
   3. For LP, redeem the PT you receive afterwards. Confirm and pay gas.

   Pendle app (opens in a new tab)Official docs (opens in a new tab)

7. HyperJump LP tokens

   $1,018 · 1 position

   HyperJump is a closed exchange. Your liquidity-pool (LP) tokens still give a share of the tokens in the pair contract. The website is gone, so you use the contracts directly.

   1. Find the pair contract in the 'pair' column of your row. If your LP tokens are staked in a farm, withdraw them there first.
   2. Approve the LP tokens to this exchange's old router contract, then call removeLiquidity on it in the explorer's Write tab.
   3. Never send LP tokens to the pair by hand: anyone can call burn first and take them. If no router works, ask a developer.

   Uniswap v2 docs (same contract code) (opens in a new tab)

8. Moonriver balance (chain halted)

   $616 · 1 positionNeeds the team

   Moonriver's public migration of MOVR to Base closed on 31 July 2026. The team reviews late claims by email, one by one. The announced late window was 60 days, so it may have closed.

   1. Read the Moonbeam team's late-claim notice (forum link).
   2. Contact [email protected] with your wallet address, token, amount, where it is held and why you missed the deadline.
   3. Expect a manual review with no set reply time. Never share your seed phrase.

   Moonbeam late-claim notice (opens in a new tab)Official docs (opens in a new tab)

9. Unclaimed Arbitrum withdrawal

   Arbitrum One, Arbitrum Nova

   $417 · 1 position

   You withdrew ETH or tokens from Arbitrum to Ethereum but never did the final claim on Ethereum. The challenge period (about 6.4 days) is long over, so the funds can be claimed now.

   1. Open the Arbitrum bridge and connect the receiving wallet.
   2. Open Transactions and find the withdrawal marked Claim, or paste the withdrawal transaction hash.
   3. Press Claim and confirm. You pay the Ethereum gas fee. The funds go to the recipient.

   Official bridges for the chains your positions are on:

   • Arbitrum Bridge (opens in a new tab)

   Arbitrum bridge (opens in a new tab)Official docs (opens in a new tab)

10. Dfyn Network LP tokens

    $359 · 2 positions

    Dfyn Network is a closed exchange. Your liquidity-pool (LP) tokens still give a share of the tokens in the pair contract. The website is gone, so you use the contracts directly.

    1. Find the pair contract in the 'pair' column of your row. If your LP tokens are staked in a farm, withdraw them there first.
    2. Approve the LP tokens to this exchange's old router contract, then call removeLiquidity on it in the explorer's Write tab.
    3. Never send LP tokens to the pair by hand: anyone can call burn first and take them. If no router works, ask a developer.

    Uniswap v2 docs (same contract code) (opens in a new tab)

11. Funds on shut-down Swellchain

    Swellchain, Swell

    $268 · 1 position

    Swell closed Swellchain: the final withdrawal deadline was 2026-06-15 and the chain was to run until 2026-06-30. Withdrawals started before 15 June can still be finalized on Ethereum.

    1. If your withdrawal was started before 15 June: after the 7-day proof wait, prove it on the Ethereum OptimismPortal2 0x758E0EE66102816F5C3Ec9ECc1188860fbb87812 (proveWithdrawalTransaction).
    2. Then call finalizeWithdrawalTransaction on the same contract. You pay ETH gas.
    3. If you never started one: Swell said contract withdrawals were possible until 30 June but are technical. Ask Swell support.

    Official bridges for the chains your positions are on:

    • Swell Superbridge UI (listed by Swellchain docs) (opens in a new tab)

    Official docs (opens in a new tab)

12. Mooniswap (1inch) LP tokens

    Mooniswap (1inch AMM, Ethereum)

    $71 · 1 positionMay not work

    Mooniswap was a 1inch exchange on Ethereum. Your LP tokens give you a share of the tokens in the pool, and the pool can still pay out.

    1. Find your pool with getAllPools() on factory 0xbAF9A5d4b0052359326A6CDAb54BABAa3a3A9643 (v1) or 0x71CD6666064C3A1354a3B4dca5fA1E2D3ee7D303 (v2), and open it in the explorer.
    2. If the LP tokens are staked in a farm, unstake them first.
    3. Call withdraw(amount, minReturns) from your wallet.

    Official docs (opens in a new tab)

13. Thruster v3 position on Blast

    $69 · 1 position

    You hold a Thruster v3 liquidity position (an NFT) on Blast. Thruster has shut down, but the position contract still works.

    1. Open the position contract 0x434575EaEa081b735C985FA9bf63CD7b87e227F9 on Blastscan, Write tab, and connect the wallet that owns the NFT.
    2. Call decreaseLiquidity with your tokenId, the liquidity amount, amount0Min, amount1Min and a deadline. Thruster's old guide explains each field.
    3. Then call collect(tokenId, recipient, max, max) to receive the tokens. You can call burn(tokenId) afterwards to delete the empty NFT.
    4. If the NFT is not in your wallet, it may be locked in another contract such as Hyperlock. Withdraw it from there first.

    Thruster position manager (opens in a new tab)

14. Balancer v2 pool share

    $23 · 1 position

    You hold Balancer v2 pool tokens, in your wallet or staked. You can exit the pool. Balancer has proposed a wind-down: if it passes, pools become withdraw-only on 30 Oct 2026.

    1. Open the Balancer app, find your pool and use Remove liquidity. Do this before 30 Oct 2026.
    2. If the app does not work, call exitPool on the Balancer v2 Vault 0xBA12222222228d8Ba445958a75a0704d566BF2C8 (Etherscan, Write tab).
    3. If your tokens are staked in Aura, Beefy or a gauge, unstake there first.

    Balancer app (opens in a new tab)Official docs (opens in a new tab)

15. AutoFarm staked deposit

    $11 · 1 position

    You staked in an AutoFarm pool. The website is gone, but the farm contract is still live and holds your deposit.

    1. Open the AutoFarmV2 chef contract (chef column) on the block explorer, Write Contract.
    2. Connect your wallet and call withdraw(pid, amount).
    3. Works on BNB Chain, Polygon, Avalanche and Cronos.

16. Funds in old Ethereum contracts (2015-2021)

    $10 · 1 position

    You have a balance in an old Ethereum contract (The DAO, EtherDelta, IDEX, the 2017 ENS registrar, DigixDAO and others). Each contract has its own withdraw call. Use the wallet that owns the position.

    1. The DAO: on the DAO token 0xbb9bc244d798123fde783fcc1c72d3bb8c189413 call approve(0xbf4ed7b27f1d666546e30d74d50d173d20bca754, yourBalance). Then call withdraw() on the WithdrawDAO contract 0xbf4ed7b27f1d666546e30d74d50d173d20bca754. It pays 1 ETH per 100 DAO.
    2. EtherDelta 0x8d12a197cb00d4747a1fe03395095ce2a5cc6819: from the wallet that deposited, call withdraw(amount) for ETH or withdrawToken(token, amount) for a token. Amounts are in the token's smallest unit.
    3. IDEX v1 0x2a0c0dbecc7e4d658f48e01e3fa353f44050c208: call withdraw(token, amount). Use token 0x0000000000000000000000000000000000000000 for ETH. It reverts if your last IDEX activity was fewer than 240 blocks ago.
    4. 2017 ENS registrar 0x6090a6e47849629b7245dfa1ca21d94cd15878ef: call releaseDeed(labelhash) for the name. The labelhash is keccak256 of the name without .eth. The deposit goes back to the deed owner.
    5. Other contracts (DigixDAO, Neufund and more): use the contract's own withdraw or refund function on Etherscan from the owner wallet. Check the contract's code first.

    WithdrawDAO contract (The DAO) (opens in a new tab)Official docs (opens in a new tab)