Use only the official links below. No real recovery asks for your seed phrase or private key. If anyone offers to recover funds for you, it is a scam.

1. Expired Pendle position

   $38 · 4 positions

   You hold Pendle PT or LP tokens from a market that has expired. They can be redeemed for the underlying asset at any time.

   1. Open the Pendle app, connect your wallet, and go to Portfolio.
   2. Find the expired position and press Redeem (for PT) or Remove liquidity (for LP).
   3. For LP, redeem the PT you receive afterwards. Confirm and pay gas.

   Pendle app (opens in a new tab)Official docs (opens in a new tab)

2. Balancer rescue reward not claimed

   Balancer, Merkl

   $25 · 3 positions

   After the 3 Nov 2025 Balancer v2 exploit, some funds were rescued. If you held pool tokens at the snapshot block, you can claim your share. Balancer is winding down, so claim soon.

   1. Open balancer.fi and look for the rescued-funds claim page. Connect the wallet that held the pool tokens at the snapshot block.
   2. Check your amount, sign Balancer's claim terms (you release Balancer from liability), then send the claim and pay gas.
   3. Chains: Ethereum, Base, Arbitrum, Optimism, Polygon. Contract wallets: Balancer asked them to write to [email protected].

   Balancer app (opens in a new tab)Official docs (opens in a new tab)

3. ETH in Blur Pool

   $19 · 1 position

   You deposited ETH into the Blur Pool to bid on NFTs and never took it out. 1 pool token equals 1 ETH and you can withdraw at any time.

   1. Open the Blur Pool contract on Etherscan and go to Write as Proxy or Write Contract.
   2. Connect the wallet that holds the balance.
   3. Call withdraw with the amount in wei (18 decimals), then confirm.

   Blur Pool contract (opens in a new tab)Official docs (opens in a new tab)

4. Unclaimed OP Stack chain withdrawal

   Blast, Mantle, Mode, Zora, Lisk, Ink, Unichain and other OP chains

   $5 · 1 position

   You withdrew from an OP Stack chain to Ethereum but never completed the last step. The funds wait in that chain's bridge.

   1. Use the official bridge of the chain you withdrew from (linked next to each of your positions).
   2. Connect the receiving wallet and open your transactions. Press Prove, wait out the challenge period shown on the page, then press Finalize.
   3. Pay the Ethereum gas fee each time.

   Official bridges for the chains your positions are on:

   • Zora Energy Bridge (opens in a new tab)

   Official docs (opens in a new tab)

5. Thruster v3 position on Blast

   $5 · 1 position

   You hold a Thruster v3 liquidity position (an NFT) on Blast. Thruster has shut down, but the position contract still works.

   1. Open the position contract 0x434575EaEa081b735C985FA9bf63CD7b87e227F9 on Blastscan, Write tab, and connect the wallet that owns the NFT.
   2. Call decreaseLiquidity with your tokenId, the liquidity amount, amount0Min, amount1Min and a deadline. Thruster's old guide explains each field.
   3. Then call collect(tokenId, recipient, max, max) to receive the tokens. You can call burn(tokenId) afterwards to delete the empty NFT.
   4. If the NFT is not in your wallet, it may be locked in another contract such as Hyperlock. Withdraw it from there first.

   Thruster position manager (opens in a new tab)

6. Balancer v2 pool share

   $5 · 3 positions

   You hold Balancer v2 pool tokens, in your wallet or staked. You can exit the pool. Balancer has proposed a wind-down: if it passes, pools become withdraw-only on 30 Oct 2026.

   1. Open the Balancer app, find your pool and use Remove liquidity. Do this before 30 Oct 2026.
   2. If the app does not work, call exitPool on the Balancer v2 Vault 0xBA12222222228d8Ba445958a75a0704d566BF2C8 (Etherscan, Write tab).
   3. If your tokens are staked in Aura, Beefy or a gauge, unstake there first.

   Balancer app (opens in a new tab)Official docs (opens in a new tab)

7. GMX v1 GLP staked

   $3 · 2 positions

   You hold staked GLP, the liquidity token of GMX v1 (Arbitrum or Avalanche). GMX stopped v1 trading in July 2025; you can only sell existing GLP back for the underlying assets.

   1. Open v1.app.gmx.io, connect your wallet and use the Sell GLP page. If your GLP is staked, the page unstakes it as part of the sale.
   2. If the page fails, call unstakeAndRedeemGlp(tokenOut, glpAmount, minOut, receiver) on RewardRouterV2: Arbitrum 0xB95DB5B167D75e6d04227CfFFA61069348d271F5.
   3. GMX docs also mention claims for GLP holders in their distributions section. Rows marked as contracts (vesters, vaults) are unclear.

   GMX v1 app (opens in a new tab)Official docs (opens in a new tab)

8. zkSync Lite balance not claimed

   $3 · 2 positions

   zkSync Lite was shut down on 2026-05-04. Remaining balances are claimable on Ethereum through a claim contract and a withdrawal portal. Your account is on that list and has not claimed.

   1. Open the zkSync Lite withdrawal portal and connect the wallet that owned the account.
   2. The portal finds your address in the final state, builds the proof and sends the claim. Follow its prompts.
   3. Confirm the Ethereum transaction. Tokens go to your L1 address. Matter Labs sponsors gas for the first 100,000 withdrawals.

   zkSync Lite withdrawal portal (opens in a new tab)Official docs (opens in a new tab)

9. Ionic Protocol deposit

   $3 · 1 positionMay not work

   Ionic Protocol lending is shut down and ionic.money is now a domain for sale. Your deposit receipt (ionToken) may still be redeemable, only for the cash left, first come first served.

   1. Open the ionToken contract for your market and chain in the block explorer. Find the pool list with PoolDirectory.getAllPools().
   2. If you have an open loan, repay it first.
   3. Connect your wallet and call redeem or redeemUnderlying. You get at most the cash left in the market.

   Official docs (opens in a new tab)

10. Orbit Lending deposit on Blast

    $3 · 1 position

    You supplied funds to Orbit Lending on Blast, which was exploited. You can still withdraw, but some markets hold less cash than is owed, so first come, first served.

    1. Open your cToken contract (listed in the row) on Blast's block explorer, Write tab, connect wallet.
    2. Call redeem(cTokenBalance) or redeemUnderlying(amount).
    3. If you have a borrow in the same market, repay it first; your collateral is locked until then.

    Compound v2 docs (same contract code) (opens in a new tab)

11. Unclaimed Scroll withdrawal

    $3 · 1 position

    You withdrew from Scroll to Ethereum but never claimed on Ethereum. The funds wait in the bridge.

    1. Open the Scroll bridge and connect the wallet that withdrew.
    2. Wait until the batch with your withdrawal is finalized on Ethereum, then find the entry marked Claim in the withdraw history.
    3. Press Claim and pay the Ethereum gas fee.

    Official bridges for the chains your positions are on:

    • Scroll Portal bridge (opens in a new tab)

    Scroll bridge (opens in a new tab)Official docs (opens in a new tab)

12. Seamless v1 deposit on Base

    $2 · 1 positionMay not work

    You supplied funds to the Seamless v1 lending pool on Base (an Aave v3 fork). seamlessprotocol.com now redirects to X, but the pool contract still lets you withdraw.

    1. Open the pool contract 0x8F44Fd754285aa6A2b8B9B97739B79746e0475a7 on Basescan, Write tab, connect wallet.
    2. Call withdraw(asset, amount, to) with the token address, amount = max (type(uint256).max) and your wallet.
    3. If you have debt, repay() first or withdraw only the free part.

    Seamless v1 pool on Basescan (opens in a new tab)Official docs (opens in a new tab)

13. Alpaca staked ibTokens (FairLaunch)

    Alpaca Finance

    $2 · 1 position

    You staked Alpaca ibTokens in the old FairLaunch farm on BNB Chain. The app is gone but the contract lets you take them out. The ibUSDC pool (pid 24) may not pay.

    1. Open FairLaunch 0xA625AB01B08ce023B2a342Dbb12a16f2C8489A8F on BscScan, Write Contract.
    2. Call withdrawAll(user, pid) with your address and the pool id, or emergencyWithdraw(pid).
    3. Then call withdraw(shares) on the ibToken vault to get the base token. Contract wallets must send from the contract.

    FairLaunch on BscScan (opens in a new tab)

14. Polygon zkEVM balance

    $2 · 2 positions

    Polygon zkEVM's sequencer stopped on 1 July 2026. Wallet-held funds not bridged before then can be claimed on Ethereum in a claim UI. Polygon treats unclaimed assets as abandoned after 2027-12-31.

    1. Open the Polygon zkEVM claims site and connect the wallet that held the funds.
    2. Pick your balances and send the claim transaction on Ethereum.
    3. Funds locked inside DeFi contracts are not auto-migrated. Ask Polygon through the forum post.

    Official bridges for the chains your positions are on:

    • Agglayer bridge UI (opens in a new tab)

    zkEVM claims site (opens in a new tab)Official docs (opens in a new tab)

15. Lisk L2 balance (closing)

    $1 · 2 positions

    Lisk's own chain closes on 2026-10-31. Lisk says withdrawing to Ethereum takes about 8 days, and unstaking LSK adds 3 days. Start now.

    1. Open the Lisk bridge (type bridge.lisk.com yourself) and connect your wallet.
    2. Withdraw your assets to Ethereum. If you staked LSK, unlock it first and wait 3 days.
    3. After the wait, prove and finalize the withdrawal on Ethereum. You pay gas on both chains.

    Official bridges for the chains your positions are on:

    • Lisk Bridge (opens in a new tab)

    Lisk bridge (opens in a new tab)Official docs (opens in a new tab)

16. Nucleus vault shares

    Nucleus (BoringVault)

    $1 · 1 position

    Nucleus deprecated its vaults on 19 Dec 2025 and the withdraw page is gone. You can redeem vault shares through the Teller contract, but only for assets the vault still holds.

    1. Read the Nucleus deprecation guide first.
    2. Check which tokens the vault still holds, and your vault token balance, on Etherscan (or the Plume explorer).
    3. On the vault's Teller contract, Write tab, call bulkWithdraw(withdrawAsset, shareAmount, minimumAssets, to). The guide says to use 0 for minimumAssets.

    Nucleus deprecation guide (opens in a new tab)Official docs (opens in a new tab)

17. Alpaca v1 vault tokens

    Alpaca Finance

    $1 · 1 position

    You hold Alpaca v1 ibTokens (deposit receipts) on BNB Chain. The vault still pays out the underlying token.

    1. Open the ibToken contract (contract column) on BscScan and go to Write Contract.
    2. Connect the owner wallet and call withdraw(shares).
    3. ibBUSD, ibETH, ibBTCB and ibUSDC were migrated: withdraw may pay a different token. If it reverts, read the contract's functions on BscScan.

18. PoolTogether deposit still in pool

    $1 · 1 position

    You deposited into a PoolTogether v3 or v4 prize pool and never withdrew. Your deposit is still in the pool contract.

    1. Open the prize pool contract (prize_pool address) on the block explorer.
    2. v4: call withdrawFrom(from, amount) with your address. v3: call withdrawInstantlyFrom(from, amount, controlledToken, maximumExitFee).
    3. v3 can charge an early-exit fee. Confirm and check your wallet.

    Official docs (opens in a new tab)

19. ReactorFusion deposit (zkSync)

    ReactorFusion (zkSync)

    <$1 · 1 position

    ReactorFusion lending is shut down and the website is gone. Your deposit receipt token may still be redeemable, but only for the cash left in the market, after you repay any debt.

    1. Open the receipt token contract of your market (in your row) in the block explorer, Write tab, and connect your wallet.
    2. If you have an open loan, repay it first.
    3. Call redeem or redeemUnderlying (or withdraw, if the contract shows that name). You get at most the cash still in the market.
    4. Not tested by us. Pay the network fee in the chain's coin. A developer may be needed.

    Compound v2 docs (same contract code) (opens in a new tab)

20. Unclaimed Polygon PoS withdrawal

    Polygon PoS bridge

    $0 · 4 positionsMay not work

    You burned tokens on Polygon to withdraw to Ethereum, and the checkpoint is done, but the exit was never run on Ethereum. The tokens wait in the bridge.

    1. Open Polygon Portal and connect the wallet that withdrew.
    2. Find the withdrawal in your transactions and press Initiate Claim.
    3. Approve in your wallet, then press Claim Tokens. Pay the Ethereum gas fee. The tokens go to the burner address.

    Polygon bridge (opens in a new tab)Official docs (opens in a new tab)